On Thu, Apr 17, 2025 at 3:28?PM Tim via <w4yn=[email protected]> wrote:
No it's there I missed it!
1. Make a cable to connect the ¡°R_OUT¡± (or Q) and ¡°L_OUT¡± (or I) and Ground (GND) on? the Teensy Audio Hat pins with the 90-degree pins next to the Teensy board (pins 17,? 18, 19). The best way to do this is to use IDC jumper wires with female header socket.? Twist the wires together for best noise immunity.?
