开云体育

I am very hopeful Richard. My limited information and speculation is from multiple sources over time. The one thing I am sure of today that concerns my rig is that Astro Devices is in the process of

Mickey, I am delighted to hear that you have a plan to achieve remote control of your DOB!? I hope you will enjoy it as much as I do. Richard

Mickey, Could you clarify this statement. “Also in the near future there is no plans for an Argo Nav (nexus killer) Astro Devices Nexus Pro killed that and as for the Servocat Gen 4, I wouldn't hold

Paul, I had been helping beta test George’s new Servocat driver and had the exact same problems as you with his latest version (I think 0.8). I too noticed that Peter’s Servocat driver now works

Hello everyone who is wanting to to know what to do about using ascom drivers with the Nexus/Nexus Pro DSC. I had a long conversation yesterday afternoon with Serge (owner Astro Devices). Thanks to

Paul, I am using Peter’s 32bit ASCOM driver. Richard Sent: Sunday, December 17, 2023 5:41 PM To: [email protected] Subject: Re: [ServoCAT] Nexus DSC and Argo Navis Encoders As Bob mentions above, I

As Bob mentions above, I had to replace my Nexus DSC with the Argo Navis in order to control my Dob with either ASCOM driver.? My scope has the 40k step encoders and I can confirm that the AN works

Hello Filippo, I have emailed you a new firmware for Nexus DSC that should solve your problems using the ASCOM driver for ServoCAT written by George Hilios. Best Regards, Serge Antonov, Astro Devices.

Filippo, If the wheel moves snd the structure does not you must have a problem. ?That was the same symptom I had when I discovered the broken gear. ?The wheel would move and not turn the shaft it

Thank you Richard in fact a gigantic thank you. Now I can moved forward because I'm another ServoCat email chain it seems that the 40k DSC work with either Argo or Nexus. I will be leaning on you in

Mickey, i think your suspicion is correct. ?The combination of the Argo Navis + ServoCAT + the ASCOM driver enables the connection. ?When I load Stellarium the ASCOM virtual hand pad then loads

Filippo, The Argo Navis will work fine with 40K encoders. My scope has 40K encoder and I have both the Nexus and Argo Navis. I regularly switch between them. I no longer have a Servocat so I can’t

Hello Richard, are you able to use the ascom driver in servocat because you have the Argo Nav and not the Nexus? If this is not the case please describe how you are connecting to the Ascom driver in

Hello everybody, it seem that there is no way to let me control via Ascom my SC/Nexus DSC (not pro). People that can do that they use Argo Navis. It is OK for me to replace my Nexus with the Argo

Hello Gary and everybody, I would like to ask a question about a problem I described in the past. I tried to optimize my system for astrophotography. I recognized some backlash in my system. Gary gave

Hi all, My Obsession UC18 telescope is able to be remote controlled via the ASCOM driver for the ServoCAT. For mosaics of large objects (>5x my field of view) I use the virtual hand pad of the ASCOM

I've had a number of inquiries on this - just to be clear these are only for Gen3 ServoCAT's. A Gen3 can be distinguished by looking at the front panel - left side - there is a USB PC USB port (vs. on

I have 10 of these left. It is a new Gen3 Hand Controller with nice plastic card showing functions as well as an extra long coiled connection cable. Original price $199. Christmas Sale: $159. Write to

I remember years ago ... I was out one night with the 30" in Arizona... I remember it was a nicely transparent night with good seeing and I happen to be cruising around at 500X... and I happened upon

All very good news! And nice shot. BC