开云体育

Version 7.0C is available on request by emailing me at bill at servocat dot com ( bill@... ). Please include your serial number from the back of the control box and indicate what GEN you have

Where is the version 7 update for servocat located? Mickey

There is always at least one flat on the shaft. As mentioned I don't remember which size scope Richard has. The 15/18UC's both have a 1/4" shaft and thus there is only one flat and one set screw. One

I would like to see a close up pic of the shaft of the area the set screw makes up to. In previous Tool and Die work says a small flat ground or filed onto the shaft gives the set screw more area to

yes indeed that works! The outside one only need be 1/8". Good suggestion - thanks Bob. g.

Richard. In a previous life another common fix we used for setscrews in high vibrations situations is to stack them. Not really high vibration but should work. Just remember if you need to remove the

Richard, Looks nice - however its totally unnecessary. The design I came up with will hold, far far too many in the field with very very few complaints of issues with the set screws to say otherwise.

All, I am still fighting the set screw backing out of the brass spool. Here is a split spool I am designing in eMachineShop.com that clamps the shaft rather than using a set screw.? Thoughts? Richard

Hi Tim, thanks for your message, unfortunately, even a Windows updated did not solve the problem nor did a manual search for a driver. But anyway, there is a workaround and I trust Bill to

Hi Bill, the issue of Windows 11 and the "could not open serial port" seems to be still there. I was only able to update my ServoCat by using a Windows 10 machine. If you will need some more on this

Thanks Bill for helping me out on this and for your outstanding and fast support! I just wanted to add, that I am really happy that you took over the support of the ServoCat after Gary's retirement,

I have responded to Uli in a private email but I thought I should address this here for anyone watching... There is no issue with the upload of Uli's parameters. There is confusion between what is

I have responded to Uli in a private email but I thought I should address this here for anyone watching... There is no issue with the upload of Uli's parameters. There is confusion between what is

Good Morning All: Windows 10 and 11 does not seam to support old USB ports out of the box.? I have experanced this with Win 10 and Win 11,? I would get a port error with Sky or SCU.? I found

Hello Jordan, I had the same problem as I wanted to update my SC today with the files Bill sent me. I just got it to work with a Windows 10 Notebook. My current Windows 11 Notebook did not work and

Hi Gary, I updated my Gen3 today to 70.C and ran in a problem that it is not possible to upload my scope parameters again. I do it as stated in the manual with ServoCat Sky and get a prompt that the

Here are a few sample images with short exposure live stacks to see some examples

Hi David, 1. Using latest firmware (I believe 7G) 2. Yes and no. I have been working with George Helios on beta testing his new servocat driver (latest I think is 0.8 November 2022) but ran into

Mike would you please go into some more details on your imaging setup process?1) what servocat firmware are you using?2) are you using the new servocat ascom driver?3) assume you are doing standard

Mike, I have been using my servocat+argo Navis equipped 18” dob with Sharpcap pro, Cartes du Ciel and Skytools3 (or sometimes Astroplanner) for several years now for Electronic Assisted Astronomy