开云体育

Hi Gary, thank you again for your quick answer. I am confident now not to be in a hurry to clutch the servocat drives just after the alignement and will not be stressed if the planetarium software

Frederic, Good day sir. My response is inline below... have a great afternoon. g.

Hi Gary, I am glad to ear from you. I own two obsession telescopes equiped with your system, one old classic 15 with version 2, and the very first UC22 with version 3. Still working like a charm and I

PHD2 can measure Dec(alt) backlash which would include the whole system so if it's within 10 arc min i assume you could enter the precise measured value in ServoCAT sky. I only have this issue in

Frederic, Good day sir. my comments are shown intermixed with your note to George Hilios:

Hi, here is an update of my first experience. Episode 1: for VISUAL Use first: remote wireless slew and center to a target with NINA connected to a UC22 Servocat Argonavis with the servocat ascom

Sevan, Just a clarification of what is going on. The "beep" is actually issued by the ServoCAT to the AN. It is indeed issued when the slew is finished. There is no motion after that, other than

In NINA there is something called "Slew to RA/DEC" or "Slew to ALT/AZ". Does this still mean the Meade Generic driver is causing Nexus to send GoTos since Nexus can't "slew" only?

I get that too, from time to time, even with an ArgoNavis.? I have reason to believe it's just a timing issue with ServoCAT talking to the DSCs.? ArgoNavis gives beeps indicating when the slew is

Thank you Sevan! I use the latest Meade Generic driver. Serge sent me a firmware version for Nexus DSC Pro that fixes the lat/long issue. After that it reported the correct lat/long every session. It

*** (section break, to help avoid confusion) For the following, one is connected to the Nexus DSC through their computer, using the LX200 driver: The first two align points sent to Nexus DSC (Pro or

Nice! I am the author of this driver and a NINA contributor so I am thrilled to see the pairing. Let me know if you have any feedback.

Thank you Richard, your answer is pushing me forward :-). I can tell you that NiNa is a fantastic tool especially if you want to trigger a capture sequence and go to sleep ;-) CS Frédéric

Hi Frédéric, Looks like you are on track for a great time remotely controlling your scope and capturing images. I use my camera and remotely connected laptop to image the stars in the 2-star

Hi Frédéric, Happy to see you here. Regarding Pulse guiding i tried this with the Meade Generic driver and it did not work, the author of the Meade Generic driver showed me how to check the driver

Hi all, I discovered the work of Gabriel Wiklund ( https://app.astrobin.com/u/Gabrielwiklund#gallery ) on Astrobin and decided to try it with my Obsession UC22 Argonavis/ servocat 3 last firmware. (I

Hi all, There is a guy on Astrobin who mentioned he will try deep sky imaging with his Obsession UC22 and AN using NINA. I mentioned this group in case he needs help. So I became curious how the DSC

GEMs are the worst choice for tracking satellites.? It's not the equatorial mounting, per se, but rather, the need for a meridian flip with GEMs.? A fork mounted EQ mount on a wedge, for example,

Can any one tell me the settings for the servocat on a skyvision D500. Thanks Frank

Hi Fernando I believe your point is not inappropriate but I’m not owner of group In fact I was discussing about ISS but I m more into small galaxies : I look at ISS because the scope has just been