Hi Fr¨¦d¨¦ric,
?
Happy to see you here. Regarding Pulse guiding i tried this with the Meade Generic driver and it did not work, the author of the Meade Generic driver showed me how to check the driver tracelog for if commands where sent/received and what the problem was, the problem was communication in RA/DEC. Can't remember exactly but something about Alt/Az and RA/DEC.
?
Pherhaps that is not a problem with AN and the ServoCAT driver. Anyway i use a ST4 cable and that works very well!
?
I only calibrate once in PHD2 and not even every session provided nothing has changed like the friction on the bearings or so.
I connect the Meade Generic driver to PHD2 only for providing pointing information so that dec compensation can be used.
If using ST4 only and dec compensation PHD2 will prompt before starting to guide so you enter which dec(alt) your scope is at.
?
/Gabriel
Gabriel Wiklund