Hello Steve,
The filter will be reset upon a power cycle of Nexus DSC Pro. It is implemented this way to avoid the situations you have described - in case the filter is enabled and by the next time you observe you may not remember having the filter enabled.
I suspect the filter was accidentally enabled which resulted in the behaviour you described.
Best Regards,
toggle quoted message
Show quoted text
On 22 Apr 2025, at 11:39?PM, Steve Goldberg via groups.io <sgoldberg124@...> wrote:
Hi Serge,
We checked the Nexus and we did not have a filter set.
?
The Nexus is on Amelia's 15" Obsession.?
However the Nexus worked perfectly last night. Since we are just starting out, she would select an object and use push-to to move the scope. The Nexus would get her very close to the object.??
?
Regards?
Steve and Amelia?
?
?
?
On 04/21/2025 7:13 PM CDT Serge Antonov <serge@...> wrote:
?
?
Hello Steve,
?
Most likely you have enabled a filter in catalogues.
?
Please go to Find->From Catalogue, press right arrow key to select ¡®FILTER¡¯ tab and change the filter to ¡¯None¡¯ using up/down arrow keys. That should fix the problem.
?
Best Regards,
Serge Antonov, Astro Devices.
On 22 Apr 2025, at 5:32?AM, Steve Goldberg via groups.io <sgoldberg124@...> wrote:
Hi,
We have recently purchased the Nexus DSC Pro and tried it last night while at the Texas Star Party.
I have a question about selecting an object.
?
We were in the Catalog Messier, and wanted M31 (or some other object currently up). We typed in the 3 then 1 and pressed OK. It returned some other M object information, not 31.
?
Something similar with the NGC catalog. Request one specific object and a different NGC object is displayed.
?
The first couple of objects we selected during the night were fine, no issue. But after some use, the above issue started happening.
?
Any thoughts on why this is happening?
This is a new Nexus right out the box.
?
Thanks
Steve Goldberg
