¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Winterizing, replacing the gally foot pump, bow running light, battery storage


 

Rick,
?
I need to go down to the boat & measure but this looks like the light
?
?
john

From: "s227classassociation-owner@..." To: s227classassociation@...
Sent: Thursday, July 11, 2013 10:37 PM
Subject: [s227classassociation] Re: Winterizing, replacing the gally foot pump, bow running light, battery storage
?
Hi John

I checked the Defender Catalog again, and could not find it. I recall that Perko had a part that was the old Lucas part.

Rick

--- In mailto:s227classassociation%40yahoogroups.com, john guido wrote:
>
> Hi,
> ??
> I have hull number 50 and would be interested in the bow light if you can figure out where to get a model that fit in place of the old one. It does seem top be a Lucas fitting. Actually the lens on mine is cracked, to outer lens, the inner red and green are fine.
> ??
> ??
> Thanks
> ??
> john??
>
>
> ________________________________
> From: s227classassociation
> To: mailto:s227classassociation%40yahoogroups.com
> Sent: Sunday, June 30, 2013 6:55 PM
> Subject: [s227classassociation] Re: Winterizing, replacing the gally foot pump, bow running light, battery storage
>
> ??
>
> Dave, I could not find the nav light listed in Defender catalog....come to think of it...i believe it was in their Clearance room...i usually rummage that area for deals ever Spring...i think zperko acquired asset of Lucas and used 120 BB as rhe part number.
>
> --- In mailto:s227classassociation%40yahoogroups.com, "uswa174" > >
> >
> >
> > --- In mailto:s227classassociation%40yahoogroups.com, "s227classassociation" wrote:
> >
> > > i just replaced my bow light. purchased at Defender...forgot the brand but it was a direct replacement. i had to rewire thru the bow pulpit. somewhat frustrating task but managed to do it but be careful! i'll dig up the modle and post it later.
> >
> > Hey Rick,
> >
> > I need to replace the plastic part of my bow running light assembly, which hangs from and is welded to the pulpit. Do you know which model you purchased from Defender? The stainless steel back plate is still intact, as is the wiring and the bayonet fitting for the lamp (pictures in the Photo section).
> >
> > Thanks!
> >
> > --Dave
> >
>

Join [email protected] to automatically receive all group messages.