开云体育

Should be part of what is added for Probe.. I am thinking about doing the probe with Gcode rather then scripting... Would you all feel better about changing Gcode rather then doing scripting? It would

Brian I know you didn’t ask, but I use probing all the time, so I will offer anyway, feel free to ignore J I use HOSS’ probing and ProbeIt. Both have advantages and disadvantages. The block which

I was a little worried about my spindle overheating so I glued a heat sink to the motor and then put a standard 12v PSU fan on the heat sink and wired it all up to turn on automatically whenever the

Hello all! What is the best approach here - having all the brains stuff in one big Brain, or separating it into different small Brains? So far I have them more or less separated and they seem to work

I see what your talking about and understand the concept of why having more than one comp could be necessary. But that only applies to Gcode you write manually where YOU can predict that one type of

Hi Brian, Probing: Milling Machine; I have a screen that I was ABLE TO WRITE IN VB, that uses 14 sequences, none of them tool length. Outside any side-4 Outside any corner- 4 Inside a hole -1 Inside

Hi Brian & Jerry, May I butt in here please? With probing, I would just love it if we could select to start off by finding the centre of a pre-cut hole and then set Z zero from the base through that

Hi Brian, Downloaded the latest version to take a look at this, but can't see anywhere this option... Where should I be looking? Thanks, Dan

ok-it says I am connected, Brian. Andy Wander _____ Sent: Monday, March 09, 2015 1:34 PM To: mach1mach2cnc@... Subject: Re: [mach1mach2cnc] Where are we in Mach 4 I was thinking you where

I work at home-and pretty much at all hours. I'm trying to connect now(I went to Option 2, as the first was not working) Andy Wander _____ Sent: Monday, March 09, 2015 1:34 PM To:

I was thinking you where at work now :) Sure thing.. here is the URL : http://machremote.dyndns.org:8040/

Welcome to the world of CNC Rick! Surprised you didn't join earlier. Have you gone to the Cambam Forum? Not sure what search you want to do. Can you amplify on what you want to search? Paul's setup is

What do I need to do to get you in there? Is there a program I need to install? Andy Wander _____ Sent: Monday, March 09, 2015 1:18 PM To: mach1mach2cnc@... Subject: Re: [mach1mach2cnc]

We have a server here that we use... the package is called screen connect.

Marcus, I need this machine to be reliable so i am probably going to buy the Auto Tech router type 3 phase water cooled spindle to have on hand in case the current motor fails. If i can get them to

Thanks Brian.. Garry [mach1mach2cnc] <mach1mach2cnc@...> wrote:

I have owned my RF30 mill/drill for about 25 years doing only manual machining. I just installed a CNC system made by Paul Thompson. My software consists of Alibre PE, CamBam, and Mach3. Thankfully, I

Sure, Brian, I could get you in there-what remote software do you prefer? Andy Wander _____ Sent: Monday, March 09, 2015 10:04 AM To: mach1mach2cnc@... Subject: Re: [mach1mach2cnc] Where

Brian: Quick answer on probing: Center and Edge in both X or Y direction(or both) Top Center of hole or pocket (X or Y or both) I have been using Dave Bagby's excellent MachStdMill screenset on Mach3,

Hello Andy, Is there any chance I could remote into that machine to see if I can see what is going wrong? Very sorry I didn't see that on the forum, I have been working on code and testing, My forum