What do I need to do to get you in there? Is there a program I need to install?

Andy Wander

---

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Monday, March 09, 2015 1:18 PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Where are we in Mach 4

We have a server here that we use... the package is called screen connect.

On 3/9/2015 10:17 AM, 'Andy Wander' ohawiseguyeh@... [mach1mach2cnc] wrote:

Sure, Brian, I could get you in there-what remote software do you prefer?

Andy Wander

---

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Monday, March 09, 2015 10:04 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Where are we in Mach 4

Hello Andy,
Is there any chance I could remote into that machine to see if I can see what is going wrong? Very sorry I didn't see that on the forum, I have been working on code and testing, My forum time is very limited and I count on direct contact so please feel free to contact me directly if you have an issue! I want them fixed!!!!

Thanks
Brian

On 3/9/2015 9:51 AM, 'Andy Wander' ohawiseguyeh@... [mach1mach2cnc] wrote:

Hi Brian:

I posted on the Machsupport Forum about this. I am using an ESS, but before I even et to that point, things go haywire.

-After install of Mach4, when I try to run it, it says that "the application cannot run because the configuration is incorrect". Based on a tip from someone on the Machsupport forum, i installed Gearotic, and then manually ran the VC++ redistributable install from Gearotic, and was then able to run Mach4GUI. But after running the GUI a few times, it started to not appear on teh screen, that is, there would be a process called Mach4GUI, but I would never see it on my monitor.

-So in that state, I could run wxmach, and it does appear on my screen, but as soon as I try to setup the ESS plugin, Mach4 crashes.

Andy Wander

---

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Monday, March 09, 2015 9:34 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Where are we in Mach 4

Andy what seems to be the issue on your machine?

What are you running for a device?

Thanks
Brian

On 3/6/2015 4:52 PM, 'Andy Wander' ohawiseguyeh@... [mach1mach2cnc] wrote:

Geez, Ozzie....I'd be happy if I could just get Mach4 to show up on the screen more than once per reboot.....:)

Andy Wander

---

From: mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Friday, March 06, 2015 4:43 PM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] Where are we in Mach 4

Hi Brian,

Please tell us where we are in the grand scheme of Mach 4.

Can we expect a package comparable to Tormach's new conversational version of Linux for both mill and lathe? Of course I own the Mill Wizard, but that does nothing like the Tormach program for lathe.

Will we see Mach 4 with probing sequences built-in, set-up?

Many of us bought on faith, please let us in on what to expect, or is this it.

Thanks,

Jerry "Ozzie" Pryor