Re: Where are we in Mach 4
|
ok-it says I am connected, Brian.
?
From:
mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Monday, March 09, 2015 1:34
PM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Where
are we in Mach 4
?
?
I was thinking you where at work now :)
Sure thing.. here is the URL :
toggle quoted message
Show quoted text
On 3/9/2015 1:24 PM, 'Andy Wander' ohawiseguyeh@... [mach1mach2cnc]
wrote:
What do I need to do to get you in there? Is there a program I need
to install?
?
?
?
?
We have a server here
that we use... the package is called screen connect.
Sure, Brian, I could get you in there-what remote software do you
prefer?
?
?
?
Hello Andy,
Is there any chance I could remote into that machine to see if I can see what
is going wrong? Very sorry I didn't see that on the forum, I have been working
on code and testing, My forum time is very limited and I count on direct
contact so please feel free to contact me directly if you have an issue! I want
them fixed!!!!
Thanks
Brian
Hi Brian:
?
I posted on the Machsupport Forum about this. I am using an ESS,
but before I even et to that point, things go haywire.
?
-After install of Mach4, when I try to run it, it says that
"the application cannot run because the configuration is incorrect".
Based on a tip from someone on the Machsupport forum, i installed Gearotic, and
then manually ran the VC++ redistributable install from Gearotic, and was then
able to run Mach4GUI. But after running the GUI a few times, it started to not
appear on teh screen, that is, there would be a process called Mach4GUI, but I
would never see it on my monitor.
?
-So in that state, I could run wxmach, and it does appear on my
screen, but as soon as I try to setup the ESS plugin, Mach4 crashes.
?
?
?
Andy what seems
to be the issue on your machine?
What are you running for a device?
Thanks
Brian
Geez, Ozzie....I'd be happy if I could just get Mach4 to show up on
the screen more than once per reboot.....:)
?
?
?
?
Hi Brian,
Please tell us where we are in the grand
scheme of Mach 4.?
Can we expect a package comparable to
Tormach's new conversational version of Linux for both mill and lathe? Of
course I own the Mill Wizard, but that does nothing like the Tormach program
for lathe.?
Will we see Mach 4 with probing sequences
built-in, set-up?
Many of us bought on faith, please let us in
on what to expect, or is this it.
Thanks,
Jerry "Ozzie" Pryor
?
?
?
?
|
