开云体育

so maybe screen4 has the only chance of working. i tried it on one of my xp machines and i can not select anything. if i right mouse click an item, it is briefly selected and then the selection

I found that using both programs was necessary to (most-)easily do everything I needed. My only advice is to Save often.... Andy Wander _____ Sent: Thursday, February 12, 2015 11:31 AM To:

Peter, It's something I won't forget now. Imagine the mad axe swinging CNC machine with circular saw that popped into my head… and then Tom said he’d run out of axes and needed another axe!… .It

i think i determined that screen4 is the only one that has any chance of working. if i could just figure out how to use it without making a total mess and or crashing i could do the few changes i

Dave, As you are a resident of England I am surprised that you do not know that the plural of axis is axes. After all, it is called English. :-D Peter

I confess I had to look that up before I posted, but then I'm a little dyslexic so your lucky to get any sense out of me :-) Regards Dave

I've always used Screen4 on an XP machine and never had any speed issues at all. Screen4 is very particular about how you do things, and it's very easy to create a total mess. It can take a lot of

To set depth ? sorry Tom . Got it now.

Thanks Tom. An automated saw machine ?it all makes sense ?now. ?So you want a stepper to turn a screw to move a stop. With a DRO read out to set acurate ?lengths. ? Regards?Dave

i can not find a screen editor for mach3 that works. when starting the original mach screen i get an error that machscreenreadonly.dll is missing although the program does load. i can not find any

Hi Dave, Sorry for my English.... It is a saw machine intended for cutting aluminum bars with two manipulators, one for feeding and position the material into the machine and the second one is to

High Rich, Sorry, I do not have a Gecko so I cannot help you with your question. What brand probe do you have and where is it available? Take care, Bertho

Dave... Axes is plural of axis ( http://dictionary.reference.com/browse/axis?s=t). It is really unfortunate that axes is also the plural of axe ( http://dictionary.reference.com/browse/axe?s=t).

Hi Tom, Please don't take this the wrong way but in the UK an axe is a thing that cuts wood. As a machine designer I have an image in my head of some crazy wood cutting machine with axes and saw

Hi Adam, This is exactly what I need. I will try to find if there are some commercialy available. Thanks, Tom 2015-02-11 14:26 GMT+01:00 Adam Brunette Adamj12b@... [mach1mach2cnc]

Hi Dave, Interesting device, no doubt this is use full. According to my knowledge those servos uses PWM signal to control servo. Thanks. Tom 2015-02-11 14:11 GMT+01:00 qconvers@... [mach1mach2cnc]

we have a 1970's WABCO (Westinghouse Air Brake Co) earthmover and the spline collar on the output shaft of the front motor is hammered. We have found a waterjet guy who says he's cut splines for other

I hope someone can help me understand why I am have trouble setting up a touch probe. I have a Gecko540>UC-100>laptop>Mach3. The set up has worked well for over a year and still does. However

Hi Tom, With a little Goggling i was able to find a few circuits that can do what you need. The first one looks good, but with 4x decoding, you might have too many pulses for your application.