Bob,
Thanks for your help!
After our phone coversation...I realized what I was doing wrong.
On the "INPUT SIGNALS SELECTION PAGE" I was unchecking the Limit boxs, but not saving...:>(
I feel so tupid...:>)
Robin
From: Robert Campbell
To: mach1mach2cnc@...
Sent: Monday, March 01, 2004 8:59 PM
Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2
Robin,
When you have time please let me know what you did to get it working.
Bob Campbell
Bob@...
www.campbelldesigns.com
Breakout board
THC board sets
CNC router plans
Stepper Motors
----- Original Message -----
From: "INDECO" <indeco@...>
To: <mach1mach2cnc@...>
Sent: Monday, March 01, 2004 6:20 PM
Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2
> I HAVE MOTION!!!!! errr... sorry for yelling :>) Just tooooo excited!!!
>
> Thanks to all for the help!!!
>
> Robin
>
> PS... I LOVE THIS GROUP....;>)
>
>
>
>
>
> ----- Original Message -----
> From: INDECO
> To: mach1mach2cnc@...
> Sent: Monday, March 01, 2004 5:53 PM
> Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2
>
>
> The X & Y are yellow and the pulse frequency is "25742"
> None are green.
> ----- Original Message -----
> From: Art Fenerty
> To: mach1mach2cnc@...
> Sent: Monday, March 01, 2004 5:14 PM
> Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2
>
>
> Robin:
>
> On the diags page, all the input LED's should be off, are they??
> Are any of them green? What is the pulse frequency on the diags page?
>
>
> Art
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> ------------------------------------------------------------------------
------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
>
>
> b.. To unsubscribe from this group, send an email to:
> mach1mach2cnc-unsubscribe@...
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
>
>
>
> --------------------------------------------------------------------------
----
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
>
>
> b.. To unsubscribe from this group, send an email to:
> mach1mach2cnc-unsubscribe@...
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
