Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
still can not clear E-Stop in Mach 2
|
INDECO
The X & Y are yellow and the pulse frequency is "25742"
toggle quoted message
Show quoted text
None are green. ----- Original Message -----
From: Art Fenerty To: mach1mach2cnc@... Sent: Monday, March 01, 2004 5:14 PM Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 Robin: On the diags page, all the input LED's should be off, are they?? Are any of them green? What is the pulse frequency on the diags page? Art Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
INDECO
I HAVE MOTION!!!!! errr... sorry for yelling :>) Just tooooo excited!!!
toggle quoted message
Show quoted text
Thanks to all for the help!!! Robin PS... I LOVE THIS GROUP....;>) ----- Original Message -----
From: INDECO To: mach1mach2cnc@... Sent: Monday, March 01, 2004 5:53 PM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 The X & Y are yellow and the pulse frequency is "25742" None are green. ----- Original Message ----- From: Art Fenerty To: mach1mach2cnc@... Sent: Monday, March 01, 2004 5:14 PM Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 Robin: On the diags page, all the input LED's should be off, are they?? Are any of them green? What is the pulse frequency on the diags page? Art Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Robert Campbell
Robin,
toggle quoted message
Show quoted text
When you have time please let me know what you did to get it working. Bob Campbell Bob@... www.campbelldesigns.com Breakout board THC board sets CNC router plans Stepper Motors ----- Original Message -----
From: "INDECO" <indeco@...> To: <mach1mach2cnc@...> Sent: Monday, March 01, 2004 6:20 PM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 I HAVE MOTION!!!!! errr... sorry for yelling :>) Just tooooo excited!!!------ Yahoo! Groups LinksService. ---- Yahoo! Groups LinksService.
|
|
INDECO
Bob,
Thanks for your help! After our phone coversation...I realized what I was doing wrong. On the "INPUT SIGNALS SELECTION PAGE" I was unchecking the Limit boxs, but not saving...:>( I feel so tupid...:>) Robin From: Robert Campbell To: mach1mach2cnc@... Sent: Monday, March 01, 2004 8:59 PM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 Robin, When you have time please let me know what you did to get it working. Bob Campbell Bob@... www.campbelldesigns.com Breakout board THC board sets CNC router plans Stepper Motors ----- Original Message ----- From: "INDECO" <indeco@...> To: <mach1mach2cnc@...> Sent: Monday, March 01, 2004 6:20 PM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > I HAVE MOTION!!!!! errr... sorry for yelling :>) Just tooooo excited!!! > > Thanks to all for the help!!! > > Robin > > PS... I LOVE THIS GROUP....;>) > > > > > > ----- Original Message ----- > From: INDECO > To: mach1mach2cnc@... > Sent: Monday, March 01, 2004 5:53 PM > Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > The X & Y are yellow and the pulse frequency is "25742" > None are green. > ----- Original Message ----- > From: Art Fenerty > To: mach1mach2cnc@... > Sent: Monday, March 01, 2004 5:14 PM > Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > Robin: > > On the diags page, all the input LED's should be off, are they?? > Are any of them green? What is the pulse frequency on the diags page? > > > Art > > > Yahoo! Groups Sponsor > ADVERTISEMENT > > > > > > ------------------------------------------------------------------------ ------ > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > > > b.. To unsubscribe from this group, send an email to: > mach1mach2cnc-unsubscribe@... > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > > -------------------------------------------------------------------------- ---- > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > > > b.. To unsubscribe from this group, send an email to: > mach1mach2cnc-unsubscribe@... > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > > > > Yahoo! Groups Links > > > > > ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Robert Campbell
Robin,
toggle quoted message
Show quoted text
I am glad that you got it working. I now have Mach2 working in my office. I bought a special at Fry's for $199. It had the unix (Lindows) installed on it. I formatted the hard disk and installed Windows XP pro. Now I can answer questions while I am in my office. I now have five computer hooked up in my office plus my laptop. In my shop I have two more running my router. Bob Campbell Bob@... www.campbelldesigns.com Breakout board THC board sets CNC router plans Stepper Motors ----- Original Message -----
From: "INDECO" <indeco@...> To: <mach1mach2cnc@...> Sent: Wednesday, March 03, 2004 8:49 AM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 Bob,not saving...:>( I feel so tupid...:>)excited!!! >2 >page? > ------------------------------------------------------------------------------ Yahoo! Groups LinksService.
|
|
INDECO
Now if I can figure out how to wire the 2 servos and limit switches from Aerotech I would be in good shape...:>)
toggle quoted message
Show quoted text
Any takers on helping me out? Robin PS...I have pics that I can send. ----- Original Message -----
From: Robert Campbell To: mach1mach2cnc@... Sent: Wednesday, March 03, 2004 10:25 AM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 Robin, I am glad that you got it working. I now have Mach2 working in my office. I bought a special at Fry's for $199. It had the unix (Lindows) installed on it. I formatted the hard disk and installed Windows XP pro. Now I can answer questions while I am in my office. I now have five computer hooked up in my office plus my laptop. In my shop I have two more running my router. Bob Campbell Bob@... www.campbelldesigns.com Breakout board THC board sets CNC router plans Stepper Motors ----- Original Message ----- From: "INDECO" <indeco@...> To: <mach1mach2cnc@...> Sent: Wednesday, March 03, 2004 8:49 AM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > Bob, > > Thanks for your help! > After our phone coversation...I realized what I was doing wrong. > On the "INPUT SIGNALS SELECTION PAGE" I was unchecking the Limit boxs, but not saving...:>( > I feel so tupid...:>) > > Robin > > > > > From: Robert Campbell > To: mach1mach2cnc@... > Sent: Monday, March 01, 2004 8:59 PM > Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > Robin, > > When you have time please let me know what you did to get it working. > > Bob Campbell > Bob@... > www.campbelldesigns.com > Breakout board > THC board sets > CNC router plans > Stepper Motors > ----- Original Message ----- > From: "INDECO" <indeco@...> > To: <mach1mach2cnc@...> > Sent: Monday, March 01, 2004 6:20 PM > Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > > I HAVE MOTION!!!!! errr... sorry for yelling :>) Just tooooo excited!!! > > > > Thanks to all for the help!!! > > > > Robin > > > > PS... I LOVE THIS GROUP....;>) > > > > > > > > > > > > ----- Original Message ----- > > From: INDECO > > To: mach1mach2cnc@... > > Sent: Monday, March 01, 2004 5:53 PM > > Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > > > > The X & Y are yellow and the pulse frequency is "25742" > > None are green. > > ----- Original Message ----- > > From: Art Fenerty > > To: mach1mach2cnc@... > > Sent: Monday, March 01, 2004 5:14 PM > > Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 > > > > > > Robin: > > > > On the diags page, all the input LED's should be off, are they?? > > Are any of them green? What is the pulse frequency on the diags page? > > > > > > Art > > > > > > Yahoo! Groups Sponsor > > ADVERTISEMENT > > > > > > > > > > > > ------------------------------------------------------------------------ > ------ > > Yahoo! Groups Links > > > > a.. To visit your group on the web, go to: > > > > > > b.. To unsubscribe from this group, send an email to: > > mach1mach2cnc-unsubscribe@... > > > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. > > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > ---- > > Yahoo! Groups Links > > > > a.. To visit your group on the web, go to: > > > > > > b.. To unsubscribe from this group, send an email to: > > mach1mach2cnc-unsubscribe@... > > > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > -------------------------------------------------------------------------- ---- > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > > > b.. To unsubscribe from this group, send an email to: > mach1mach2cnc-unsubscribe@... > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Erie Patsellis
gee, there's just me and my wife here, and at last count, we have 7 computers, though 3 are for CNC machines....
toggle quoted message
Show quoted text
Art wrote: Bob: |
|
Ted Gregorius
I just counted 10 systems on my LAN including the one running the mill but not including two old laptops that we play with once in a while.
toggle quoted message
Show quoted text
One of the laptops is running Linux. I just poke that one with a stick once in a while. I was playing with EMC before I saw the light. Is there a prize for the biggest geek among us? BTW it's just me, my wife and one employee who never touches any of the PC's Ted Gregorius (Pres) TAG Systems Racing Products, Inc. www.tagrace.com ----- Original Message -----
From: Erie Patsellis To: mach1mach2cnc@... Sent: Wednesday, March 03, 2004 1:39 PM Subject: Re: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 gee, there's just me and my wife here, and at last count, we have 7 computers, though 3 are for CNC machines.... Art wrote: >Bob: > > > >>>I now have five computer hooked up in my office plus my laptop. >>> >>> > > > >>>In my shop I have two more running my router. >>> >>> > > Like me, your outa control.. ;) > >Art >www.artofcnc.ca > > > > > > >Yahoo! Groups Links > > > > > > > > ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Robin Szemeti
On Wednesday 03 March 2004 21:03, Art wrote:
Ted:Hmm, 4 machines running in this room, 2 and a laptop downstairs, and aDefinitely on the 10 most geeky list in my books...I have only 3Is there a prize for the biggest geek among us? whole 19"/42U rack stuffed with servers at a colo facility in London, 2 more machines in at a colo in Lausanne ... You aint a real geek until you have a whole rack ;) -- RapidCut CNC Technology CNC Plasma Cutter |
|
Erie Patsellis
Racks, got one, though it's full of mostly whole house audio and automation equipment, though there are
toggle quoted message
Show quoted text
4 pc's in there (one server and 3 mp3 players...) touchscreen computers in every room (plus extra home automation computer in the home theater). 15 computers in all... erie Robin Szemeti wrote: On Wednesday 03 March 2004 21:03, Art wrote: |
|
tagrace_99
What a sick group we are.
--- In mach1mach2cnc@..., Erie Patsellis <erie@s...> wrote: Racks, got one, though it's full of mostly whole house audio andcomputers in every room (plus extraall... 3 2.3Ghz...computers and 2 laptops running here.., and the fastest is a downstairs, and aHmm, 4 machines running in this room, 2 and a laptop London, 2 morewhole 19"/42U rack stuffed with servers at a colo facility in machines in at a colo in Lausanne ... |
|
Hugh Smith
It doesn't sound like you have Estop problems anymore so how about changing the subject line to "I got more toys than you do" so I can delete it before I waste time opening it.
toggle quoted message
Show quoted text
----- Original Message -----
From: tagrace_99 To: mach1mach2cnc@... Sent: Thursday, March 04, 2004 5:50 PM Subject: [mach1mach2cnc] Re: still can not clear E-Stop in Mach 2 What a sick group we are. --- In mach1mach2cnc@..., Erie Patsellis <erie@s...> wrote: > Racks, got one, though it's full of mostly whole house audio and > automation equipment, though there are > 4 pc's in there (one server and 3 mp3 players...) touchscreen computers > in every room (plus extra > home automation computer in the home theater). 15 computers in all... > > erie > > Robin Szemeti wrote: > > >On Wednesday 03 March 2004 21:03, Art wrote: > > > > > >>Ted: > >> > >> > >>>>Is there a prize for the biggest geek among us? > >>>> > >>>> > >> Definitely on the 10 most geeky list in my books...I have only 3 > >>computers and 2 laptops running here.., and the fastest is a 2.3Ghz... > >> > >> > > > >Hmm, 4 machines running in this room, 2 and a laptop downstairs, and a > >whole 19"/42U rack stuffed with servers at a colo facility in London, 2 more > >machines in at a colo in Lausanne ... > > > >You aint a real geek until you have a whole rack ;) > > > > > > Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: b.. To unsubscribe from this group, send an email to: mach1mach2cnc-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
to navigate to use esc to dismiss