Pretty violent R&D.
--- In mach1mach2cnc@..., "Mariss Freimanis"
<mariss92705@...> wrote:
Not so sure you want that:-)
In the previous run I had the G201 cranked up to 75VDC; the motor
develops 165W+ at that voltage. On the 1-TPI screw it developed
22lbs
(10kg) thrust at 10 meters/min.
It took a nice gouge out of my thumb, the kind it takes super-glue
to
close up and stop the bleeding.
Furthermore I had a brick instead of the "action figure" as the
load.
The brick was duct-taped to the stage; it flew off and destroyed my
PC keyboard upon the 2-G deceleration I had programmed.
I decided to play it safe one bloody thumb and and new keyboard
later
when I ran the video. I hit the mouse key to start things and it
darn
near took another bite out of me. Deleted cussing ensued.
Moral: Stay clear of fast-moving stuff unless you want to shed a
little unplanned blood.
Mariss
--- In mach1mach2cnc@..., Wayne Weedon <wayne@> wrote:
Mariss Freimanis wrote:
Hi,
Cross-posted from the geckodrive group. I thought people here
might
be interested in it.
--------------------------------------
I uploaded a short video that has an axis tooling along at 3,932
IPM.
Please go to:
Great stuff Mariss , but I think at least we should of got the
full
gory
version Swearing, Blood n all!
--
------------------------------------------------------------------
--
-------
Wayne M Weedon Email: wayne@
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774
439915
Specialists in small batch & Production Mechanical/Electrical
Engineering
------------------------------------------------------------------
--
-------
