Funny we had talked about working on the tools to do that today.
We have an XML converter tool but it will not setup the motion
controller .
We have a spreadsheet that we use to put all the data into and a
tool to read the XML's.
I can have you work with one of the guys if you like that use the
tools everyday.
Thanks
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 11:55 AM, Chuck Kahler
wrote:
toggle quoted message
Show quoted text
Brian,
Are there any new ¡°wizards¡°, guidelines or whatever for
converting from 3 to 4?
I believe it was in 2019 when I started to configure 4 and
then set it aside.?
Regards,
Chuck
On Aug 3, 2022, at 7:00 AM, Brian
Barker <brianb@...> wrote:
?
I want you to enjoy all the work we have put in :) We
have some really cool features coming out in this next
release. The Diagnostics tool is really fun to use
graphing data from the core of mach4 and anything else you
may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck
Kahler wrote:
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and
everything is working well currently.?
A while back I was having an issue on one
of my machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went
way on that machine and I never got around to
finishing up putting 4 on it.?
based on all the good things I hear about
4, I would??really?like
to get??it
up and running but I can¡¯t seem to find the time to do
it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM,
Brian Barker <brianb@...>
wrote:
?
Chuck if you have issues with 4 Please make sure
you contact us so we can help you with how the
settings differ from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM,
Chuck Kahler wrote:
Walt,
I live north of Everett and I am familiar with
Mach3, haven¡¯t installed Mach4 yet since Mach3 is
working fine.?
I¡¯ve also done some retrofitting to CNC
If you want to email me then I can give you my
phone number and we can talk about what you¡¯re
looking for.?
Chuck?
?
Hello
All. I¡¯m new to using a CNC system and new
to using the Mach4 software. I have a
LMS3990 converted to CNC, but I think
there are several things preventing my
setup from working correctly. I have
several questions that require more than
posting within this User Group. Is there
anyone in this groups that lives in the
North Seattle / Everett Washington State
area? ?I¡¯m
looking for someone that knows how to
troubleshoot Mach4 Hobby Edition and how
to make adjustment suggestions for a bench
top mill.
Thanks, Walt W.
