Brian,
Are there any new ¡°wizards¡°, guidelines or whatever for converting from 3 to 4?
I believe it was in 2019 when I started to configure 4 and then set it aside.?
Regards,
Chuck
toggle quoted message
Show quoted text
-sent from my iphone --
On Aug 3, 2022, at 7:00 AM, Brian Barker <brianb@...> wrote:
?
I want you to enjoy all the work we have put in :) We have some
really cool features coming out in this next release. The
Diagnostics tool is really fun to use graphing data from the core
of mach4 and anything else you may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck Kahler
wrote:
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and everything is
working well currently.?
A while back I was having an issue on one of my
machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went way on
that machine and I never got around to finishing up putting 4
on it.?
based on all the good things I hear about 4, I
would??really?like
to get??it up and
running but I can¡¯t seem to find the time to do it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM, Brian
Barker <brianb@...> wrote:
?
Chuck if you have issues with 4 Please make sure you
contact us so we can help you with how the settings differ
from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM, Chuck Kahler
wrote:
Walt,
I live north of Everett and I am familiar with Mach3,
haven¡¯t installed Mach4 yet since Mach3 is working fine.?
I¡¯ve also done some retrofitting to CNC
If you want to email me then I can give you my phone
number and we can talk about what you¡¯re looking for.?
Chuck?
?
Hello All. I¡¯m new to using a CNC
system and new to using the Mach4 software. I have
a LMS3990 converted to CNC, but I think there are
several things preventing my setup from working
correctly. I have several questions that require
more than posting within this User Group. Is there
anyone in this groups that lives in the North
Seattle / Everett Washington State area? ?I¡¯m looking
for someone that knows how to troubleshoot Mach4
Hobby Edition and how to make adjustment
suggestions for a bench top mill.
Thanks, Walt W.
