So I went a little further in the
configuration(set up my pins/signals in the ESS), shut down and reran Mach4,
and now, when I attempt to get back into the ESS Plugin configuration, it
highlights the "Configure" button and then just sits there.
?
If I then close the Plugin Config window,
and close Mach4, the Mach4GUI process stays up.
?
Looks like this PC may be more of a help
than we thought.......
?
From:
mach1mach2cnc@... [mailto:mach1mach2cnc@...]
Sent: Wednesday, March 11, 2015
9:02 AM
To: mach1mach2cnc@...
Subject: Re: [mach1mach2cnc] Where
are we in Mach 4
?
?
Thank you Andy!
That was a real help for us, Steve worked on your issue for 8 hours! it was
that hard to find and I think he did one heck of a job to find it that quickly!
This should help many users, we will keep pushing forward!
Thanks
Brian
toggle quoted message
Show quoted text
On 3/10/2015 9:51 PM, 'Andy Wander' ohawiseguyeh@... [mach1mach2cnc]
wrote:
?
Brian and Steve spent some time on my PC with a remote connection
yesterday, and were able to solve the problem by making changes in Mach4.
?
Brian did mention that this PC is at the low end of what is
acceptable.
?
Thanks, Brian (and Steve)!
?
?
?
I was thinking you where
at work now :)
Sure thing.. here is the URL :
What do I need to do to get you in there? Is there a program I need
to install?
?
?
?
?
We have a server
here that we use... the package is called screen connect.
Sure, Brian, I could get you in there-what remote software do you
prefer?
?
?
?
Hello Andy,
Is there any chance I could remote into that machine to see if I can see what
is going wrong? Very sorry I didn't see that on the forum, I have been working
on code and testing, My forum time is very limited and I count on direct
contact so please feel free to contact me directly if you have an issue! I want
them fixed!!!!
Thanks
Brian
Hi Brian:
?
I posted on the Machsupport Forum about this. I am using an ESS,
but before I even et to that point, things go haywire.
?
-After install of Mach4, when I try to run it, it says that
"the application cannot run because the configuration is incorrect".
Based on a tip from someone on the Machsupport forum, i installed Gearotic, and
then manually ran the VC++ redistributable install from Gearotic, and was then
able to run Mach4GUI. But after running the GUI a few times, it started to not
appear on teh screen, that is, there would be a process called Mach4GUI, but I
would never see it on my monitor.
?
-So in that state, I could run wxmach, and it does appear on my
screen, but as soon as I try to setup the ESS plugin, Mach4 crashes.
?
?
?
Andy what seems
to be the issue on your machine?
What are you running for a device?
Thanks
Brian
Geez, Ozzie....I'd be happy if I could just get Mach4 to show up on
the screen more than once per reboot.....:)
?
?
?
?
Hi Brian,
Please tell us where we are in the grand scheme
of Mach 4.?
Can we expect a package comparable to Tormach's
new conversational version of Linux for both mill and lathe? Of course I own
the Mill Wizard, but that does nothing like the Tormach program for lathe.?
Will we see Mach 4 with probing sequences
built-in, set-up?
Many of us bought on faith, please let us in on
what to expect, or is this it.
Thanks,
Jerry "Ozzie" Pryor
?
?
?
?
?
|
