Thank you Andy!
That was a real help for us, Steve worked on your issue for 8 hours!
it was that hard to find and I think he did one heck of a job to
find it that quickly!
This should help many users, we will keep pushing forward!
Thanks
Brian
toggle quoted message
Show quoted text
Brian and Steve spent
some time on my PC
with a remote connection yesterday, and were able to solve
the problem by
making changes in Mach4.
Brian did mention
that this PC is at the
low end of what is acceptable.
Thanks, Brian (and
Steve)!
I was
thinking you where at work now :)
Sure thing.. here is the URL :
What do I need to do to get you in
there? Is there a program I need
to install?
We have a server here
that we use... the package is called
screen connect.
Sure, Brian, I could get
you in there-what remote software do
you
prefer?
Hello
Andy,
Is there any chance I could
remote into that machine to see
if I can see what
is going wrong? Very sorry I
didn't see that on the forum, I
have been working
on code and testing, My forum
time is very limited and I count
on direct
contact so please feel free to
contact me directly if you have
an issue! I want
them fixed!!!!
Thanks
Brian
Hi Brian:
I posted on the
Machsupport Forum about
this. I am using an ESS,
but before I even et to that
point, things go haywire.
-After install
of Mach4, when I try to run
it, it says that
"the application cannot run
because the configuration is
incorrect".
Based on a tip from someone
on the Machsupport forum, i
installed Gearotic, and
then manually ran the VC++
redistributable install from
Gearotic, and was then
able to run Mach4GUI. But
after running the GUI a few
times, it started to not
appear on teh screen, that
is, there would be a process
called Mach4GUI, but I
would never see it on my
monitor.
-So in that
state, I could run wxmach,
and it does appear on my
screen, but as soon as I try
to setup the ESS plugin,
Mach4 crashes.
Andy what
seems
to be the issue on
your machine?
What are you running
for a device?
Thanks
Brian
Geez,
Ozzie....I'd be
happy if I could
just get Mach4 to
show up on
the screen more
than once per
reboot.....:)
Hi Brian,
Please tell us where we are in the grand
scheme of Mach
4.
Can we expect a package comparable to Tormach's
new
conversational
version of
Linux for both
mill and
lathe? Of
course I own
the Mill
Wizard, but
that does
nothing like
the Tormach
program for
lathe.
Will we see Mach 4 with probing sequences
built-in,
set-up?
Many of us bought on faith, please let us in
on what to
expect, or is
this it.
Thanks,
Jerry "Ozzie" Pryor
