On Sun, Apr 6, 2025 at 02:34 PM, <ankitk.ace@...> wrote:
only IG = Constant is mentioned and nothing about the pulse duration.
I think I should point out that the pulse duration is not important for this test in a simulation. It is important for real parts that dissipate power during the test to ensure they do not overheat. The pulse width an duty cycle must be limited to ensure the parts do not go up in smoke.
?
For my circuit the pulse width is set to 1 second, i.e. much longer than the total simulation time, so that a constant current is applied to gate (after the rise time of 1 ps) for the entire simulation. The end of the simulation is effectively the end of the pulse of current applied to the gate.
?
HTH
