¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date
Need 2 Tube Shields for SX-17
Was looking inside my SX-17 and I noticed 2 of the tubes, were lacking their tube shields.? I could have sworn they were there years ago so where are they ? Looked into my box of tubes and sure
Re: WTB HA-16
The HA-16 is the VOX adaptor for the SR-160 and SR-500. It mounts on the rear of the unit. That is what those funny little holes in the top left side of the back of the case are there for.
Re: WTB HA-16
Wow, HA-16???? What the heck is an HA-16 ? Had to look that one up in Dachis's book.? Good luck. *K2WH Bill's QRZ Biography ( https://www.qrz.com/db/k2wh ) *
WTB HA-16
I am looking for an HA-16 to complete a SR-500 system. It does not need to be functional, as long as it is not chopped up. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters Your past has no control
By waltcates · #24875 ·
Re: Hallicrafters on TV
I looked closer now at the SX-42 PANEL: the front panels on others have 4 screw holes on each side for the fastening to the cabinet and? there is about 3/4 inch from the knob edge to the front panel
By don Root · #24873 ·
Hallicrafter Hurricane listed on QRZ
FYI for the group. https://forums.qrz.com/index.php?threads/hallicrafters-sr-2000-hurricane-w-p-2000-supply.838010/
By Rick McNutt · #24872 ·
Re: Hallicrafters on TV
That screw on the right panel edge looks half way into the cabinet too ¡­ strange ..POOR OLD HALLI Don VA3DRL
By don Root · #24871 ·
Re: Hallicrafters on TV
Agree the cabinet looks HP-like, and especially with that defining trim ring. So similar in appearance to my old HP-606A - a great shop heater in the winter. Dan WB4GRA
Re: Hallicrafters on TV
The knobs don't look right either.? The cabinet looks almost like a Hewlett packard case. Maybe something cobbled together by the prop department.Sent from my Galaxy
Re: Hallicrafters on TV
In the movie Sky Captain and the World of Tomorrow, in the first few minutes, there is a very good image of an SX model on a table being used (I think) as a transmitter. *K2WH Bill's QRZ Biography (
By Bill (Group Owner) · #24868 ·
Re: Hallicrafters on TV
Interesting! It looks like a hybrid TV studio prop ¨C bits and pieces of Hallicrafters, combined with something else. If I recall correctly, this was done deliberately in TV shows and movies so that
Re: Hallicrafters on TV
The face is similar but the cabinet is wrong. The cabinet on mine has the screen top that is hinged at the rear. The SX62 still had the screen top on the cabinet.
Re: Hallicrafters on TV
Good eye, and quick fingers! Marc-k7wxk
Re: Hallicrafters on TV
Wrong knobs, but great radio (and you have quick reactions!) :-) John K5MO
By John K5MO · #24864 ·
Re: Hallicrafters on TV
It looked Good then and it still looks Good Now! Great picture. Thank You!
By Ken Stinson · #24863 ·
Hallicrafters on TV
Happened to be watching an old episode of 77 Sunset Strip (I believe the episode was Season 5 Episode 27 titled "Target Island") and in it was what I believe is an SX-42 receiver. It was up close.
Re: SX-110 Alignment Puzzle
Well done and thanks Steve: you must have a wide or long scanner to get that schematic in one scan! 73,, Don VA3DRL Sent: Thursday, November 10, 2022 10:04 PM To: [email protected]
By don Root · #24860 ·
Re: SX-110 Alignment Puzzle
Very nice.? ?As I thought the crystal filter is a throw back.tp the original Lamb filter.? The idea of single signal was to eliminate the audio image on cw.? The original filter worked at one
By Richard Knoppow · #24859 ·
Re: SX-110 Alignment Puzzle
Attached is the entire SX-110 manual in PDF format. This is a scan I did myself ¨C it¡¯s much clearer than the one over on BAMA. 73 ¨C Steve, KW4H From: <[email protected]> on behalf of
By KW4H · #24858 ·
Re: SX-110 Alignment Puzzle
I wanted to look at the handbook at bama. May have it on my other computer .? I will look for your attachment.? Pretty dire this thing will do pngSent from my Galaxy
By Richard Knoppow · #24857 ·