Walt,
Thanks for the reply.
Will this simulate the key line being plugged into
the 2-NT?
If I use this key line to supply the 12 vdc for the T/R relay
will that work?
I am currently using an external supply for the T/R relay.
Can I assume that the key line needs some kind of
load to produce the proper output?
Thank again,
Dave KC3AM
On 10/9/2022 11:37 PM, waltcates wrote:
toggle quoted message
Show quoted text
Try terminating the HA-5 With a 5.6k and measure the voltage
across?the resistor. It needs?to be greater than 20vpp.
?Walt
Cates,
WD0GOF
?
Your past has
no control over your future. Only your NOW can
impact your future.
Hello guys,
Still looking for some help to get a vintage station operating.
This station does just fine with a xtal but I would like to get
the HA-5
operational.
Output with the xtal seems fine around 45 - 50 watts.
When the HA-5 is used I get almost no output, WHY ???
Switching between the XTAL / VFO position doesn't help.
The HA-5 works great when used with my Drake 2-NT.
Any ideas why this is happening?
I would like to use this on AM.
Thanks much,
Dave KC3AM
