开云体育

So far I have not found this setting, but is there a way to lengthen then time your message stays on the screen at start up time? It flashes on then off very quickly. Just want to have it stay on for

Once you have the cable from rt systems you only need the software, the cable works on all baofeng radios Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+ [email protected]> wrote:

Thanks for your responses. I've determined that my issue is communication, PC to HT. The cable I have is at least 10 years old and is the Prolific unit. Also I'm trying to use it on laptop that still

CHIRP does the job just fine once it's set up. RT Systems is just a little more polished and supports more radios than CHIRP, I believe. RT systems (last time I bought their package several years ago)

Curiosity, please ... what version of chirp are you using? What Baofeng UV-17 variants did you try in chirp? Currently, chirp-next claims support for: Baofeng UV-17 Baofeng UV-17Pro Baofeng

Spend the money and buy RT Systems programming software it makes things so much easier. Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+ [email protected]> wrote:

Just bought the UV-17 Pro Max and can't get it to be recognized with the CHIRP programming software I downloaded. I'm using a UV-17 version that doesn't say UV-17 Pro Max specifically. Any

WIll have to check into those.? Thanks for the advice. 73 John AF5CC Sent using {0} ---- On Tue, 02 Jul 2024 01:39:35 -0500 Dave Pickering <mr.dave.pickering@...> wrote --- Try Wouxun. I have a

Try Wouxun. I have a 4m - 2m one that does it but I am sure there's 2/70 ones that do it out of the box. [email protected]> wrote:

Are there any Chinese mobile VHF/UHF dualband radios that let you store crossband memories, like where you receive on 70cm and transmit on 2m? ?The Baofeng HTs lets you do this-finally figured out

this link should cover it... https://www.opengd77.com/viewtopic.php?t=871#p7864 the short answer is that you need to reload the firmware/flash-the model # info is stored at the bottom end of the

I am having issues with a DM-1801 display says Low BT version. The radio was given to me this way. Is there a way to fix it and how Scott R. southbfd@...

Hardware: UV5R, SignaLink, Raspberry Pi3, APRS Software: Bookworm, Direwolf I have an APRS digipeater/igate set up with the above hardware software. It beacons, repeats, and igates, but when the

RT Systems now has software and true cables for most Baofeng radios, they sure save a lot of time when programming and they work with chirp Michael Kimsey MCP/MCSE/MCSA/MCITP:EA/MCITP:EDT/Security+

Unfortunately I don't have a programming cable for the Baofeng. Did get a Tidradio ht the other day and can program split frequency memories in it using ODMASTER. It will connect with the radio using

John . . . <Af5cc1@...> wrote: If you get no responses here, you may want to be the pioneer here and try it and see, then let us know if it worked. If you don't find CHIRP supports

Hi Donald, I found the error.... very stupid ! I inserted the connector into the radio but not all the way, it was missing the last click, towards the end it was hard to insert. Now everything works

I have a Baofeng UV-82HP which is a nice HT, and I would like to use it on satellites.? However, you cannot manually program crossband memories in it, and setting the repeater shift to large values

Stefano, Are you trying to install the driver for the cable chipset? There are three different chipsets I am aware of: Prolific, FTDI, or a third one CH-340. There are fake Prolific cables out there

Hi, I have tried every possible way to install the drivers downloaded first from the official Baofeng page and then from radioddity.com but without success. I have tried all the usb ports but it is