开云体育

Hi Maynard, Try activating the voice prompts when you are manually programming may be a bhelp I'm keeping track of where you are in the sequence. Bob VK2NRC wrote:

Evening Maynard, LOL — either we have a failure to communicate or our RF is in different dimensions. I am stupified my step-by-step instructions worked, and with only one save As you've seen,

Hi, Phil, I did exactly what you wrote below and it worked fine. I stored it to an empty memory location and the offset direction and frequency were both as specified. I used the frequency you did

Gday Maynard, Thanks for your reply! Forgiver me but, I remember something about saving twice but it isnt working, although the rig says receiving or transmitting freq after each save. Here's what Im

I have three Baofengs: UV-S9, UV-S9PLUS, and UV-5R and they all retain SFT-D in the memories whether set for positive, negative, or OFF for simplex. The user manual I received with the UV-5R is more

Gday to all, To, manually, program a memory channel, I use RECEIVE freq in the top register, then effortlessly use the menu to enter offset, SFT-D, etc. Even with a blank channel assignment, SFT-D is

On the second screen shot I think I? drop down two from what is posted in the screen shot and click on the USB.? Unless you have an older computer that truly has com ports. As I said in another post

I'm running a Lenovo laptop without a CD / DVD driver in it running 64 bit Win 11 or 12, whatever the latest upgrade was. I follow the setup instructions, including installing the drivers.? It ran

Dan, This is the exact cable that I got from Banggood (same name cable being sold by Aliexpress), and have used it with two Baofengs (different models) now and one other (done for friend) It handles

"COM5 not available" indicates that Chirp is not set to the USB connector that the Baofeng cable is plugged info. That's changed in the Port: selection pulldown tab. The correct port can be found by

AI8O pisze: Probably it has installed on another COM. Check in the Device manager what COM ports you have, and set Chirp to use this port. Regards, -- Bart?omiej Zieliński (bazie@...)

The ONLY system I trust is the RT Systems software and cable.? I've used them on my Yaesu FT8900R mobile, a couple of Yaesu VX 150 portables, a Baofeng UV5RHP portable, and a Baofeng BF-F8+.? I

How do I determine what cables will actually work programming Baofeng HTs? I had one that came with it when I bought a UV82. This cable also worked with Wouxin KG1-UVD. Lost that cable, and now I have

There is a thing called, egregious circumstance. Call that, very dire and unforeseeable emergency. It's sort of a last hope CYA. It allows, where no other route can be found, for a lifesaving measure

Baofeng UV-5R radios can be programmed in the frequency from 378 to 568Mhz and from 126 to 250Mhz, the illegal depends on the country in which it is used.

You could unlock it for any frequency, as long as you don't use it on frequencies that you're not licensed for, and also not if it's not FCC type accepted for services outside the amateur bands. The

It is illegal to SELL the radios that can be unlocked, not illegal to do it after you bought it. -- Ron N8WCR https://n8wcr.us Quis custodiet ipsos custodies?

You make faulty assumptions. Get a life.

Interesting that you would deliberately want to break the law and publicize the fact that you intend to? I suppose next we can expect a u-tube video on how to make your radio illegal? We have enough

Charlie . . . <w5cdt@...> wrote: If you're referring to something else, please ignore this. If you're trying to unlock it to transmit out of the ham bands, I read that the FCC made