开云体育

I think I'm having DTS/CTCSS issues with my T9; it's silent/no audio no matter what I do! Does anyone know how to do factory reset? Thank you.

This radio was bought at baofeng store but model is not listed on baofeng site models list Further WEB searches found THIS radio on TIDRADIO SITE CHIRP DOES NOT PROGRAM THIS RADIO YET I ALSO FOUND

Any help with Baofeng programing for 5RH-pro Thank You

Just wondering if anyone has seen any new firmware for this radio. Recently received and its a good bit of kit (review on my blog ( https://blog.2e0veb.com/2025/04/08/baofeng-dm-32uv-review/ ) ). One

The DM-1701 Radio Programming Software" Version 1.05 will not work with the baofeng DM32, that software is for the DM1701 only hence the reason you can only get the file .RDT instead of the .data one

Hello Fellow UV-32 "Owners" I was informed that the UV-32 is in reality a attempt by Baofeng to "RE-CASE a UV-25-UV25-Plus in a NEW Looking Format and "Save a Few $$ and that the APRS Feature Is in a

I was using the Baofeng CPS, but none of the file folders in the instructions mentioned in the program instructions were there, so I thought I had different firmware than Baofeng CPS wanted to have.

<ab2et@...> wrote: Not sure. I got my UV-5R for about $25-$30 with the extended battery plus some additional cash for the other extended battery. Donald KX8K

From reading your post again, I think you are using the RT system program, that is probably why you cannot load the .data file into it as that may have a different file extension, I don't know if this

the file extension .RDT is associated with the baofeng DM1701, are you actually using the CPS for the DM32 or are you using the RT software for it?

Maybe when I attempted to install RT SYSTEMS version of the software, it gave me new firmware. This radio is inexpensive enough, I can buy a new one if need be. This is like putting a baby back

Meaning the file you want me to use ends with *.data. I cannot select that file. The whole thing is a nightmare. 73 David N1EA

When I try what you say, the file window restricts files to *.rdt. The file that is there ends with *.data. So I cannot open the file. I bought an installer for the original software from RT SYSTEMS

Donald, Yes The "Legacy" UV-5 Radios Could Do 220 but at only about 1 Watt, but that is not the main Point as Hams, Its Exploring The Hardware Circuitry and even the Firmware, yes way back then the RU

Here is a mod for the desk charger supplied. It uses the TP5100 lithium battery charger module. ?I sliced off the portion of the original pcb leaving the input socket and battery connectors on the

I don't know why you are getting an unknown file type, what you need to do is unzip the DM32 data file out of the zip, For ease just unzip it to your desktop, now run the DM32 programming software, at

I have one also from that era. Aside from allowing transmit outside the ham bands, what does it have to offer over the newer, compliant ones? Can it do 220 MHz? Anything it can do outside our bands

Colin, Unzipped that file is: DM32 Original.data An unknown file type/ I am confused. DR [email protected]> wrote:

You dont need to press the transmit (ptt) key to upload a code plug, you only need to press these buttons when you update the firmware,,,, firmware and code plug are different, the code plug is the

I didn't see the answer to Martin Howard's question. This may be the reason I'm having problems. I've been trying to use the program without pressing the transmit and also the one below it as I turn