开云体育

Could be worth a reset.

Got this about a week ago and powers on fine but wont power off when I switch off; it will happily drain the battery even when I switch the power off, and the radio remains on. Any suggestions?

BTW: Happy New Year To All On The Group. Unlike the Baofeng UF-17 which has a a Unofficial "CPS Unofficial Build 124j" which make it a good workable radio the(Sister like) Radioddity GC-5 has Many

Hey everyone! I've got a booger that I haven't been able to figure out on my own.? I'm working with a friends GM-15 pro and immediately found out that it is not supported for programming by either

I don't see what Donald, the software from the radioddity site is the baofeng firmware, I'm? not sure why it's on the radioddity site though, even going to baofengs site gives you the exact same

Hi Tony, I don't know how do do this bud, There is no reset on the radios menu nor is there anything in the manual, I did try google but came up with nothing either.

You may wish to try resetting the radio to factory defaults before flashing the replacement firmware.

Colin . . . <M0byw@...> wrote: Is it possible that the Baofeng has something different inside from the Radioddity radio so that the firmware can't support what you're wanting

Hi, I bought a couple of 1701's and when they arrived they had the open GD77 firmware in them, I got the 1701 original firmware from the radioddity site, firmware v2.03, now flashing the radio back to

Hi, Does anybody have the UV-K6 and has a user guide? Paul /g/Low-Cost-Radio-Monitoring-and-DX

Thanks. The software works! I didn't know there were other programs beside Chirp to program these radios, but I assume the Chinese must set them up somehow - I saw lots of Baofengs being used at

You might wish to choose the "Chat with us" button lower-right at https://baofengradio.co.uk/baofeng-uv-5rh-10w-multi-band-tri-band-2500mah-vhf-uhf-long-range-walkie-talkie-two-way-radio/ and see if

check this software, Baofeng UV-5RH, I-Black (T6UV v1.1.8)

Thanks Donald, I must say, I'm not sure I had the volume up all the way each time I tested it with Chirp so I may try the tests again, but I did try setting it for BF-F8HP and it just comes back with

Peter . . . Did you check the supported radios list for CHIRP? I don't see a UV-5RH but I do see this one, and it says to use a different model when selecting the radio in CHIRP: UV-5RHP (use BF-F8HP)

Hi Everyone, Thanks for letting me join. I already have a number of UV-5R's but I have just purchased a UV-5RH. I expected it to be very similar to the 5R, but it has several different options in the

Sorry, not that good of deal anyway...........73

Ummm. Ray. Nobody else can access your Inbox or messages there. Please instead share the link from the message you intended. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: [email protected] Sent:

Want to let the list know, UV-5R sale!!.....I have ordered from here before. https://mail.google.com/mail/u/0/#inbox/WhctKKZGhMLdWTcnSGrGFNzsMWQnCPCgblFTJWdslRZlTtcwWPlTxdlxFnpQkgsdXGCKvwB wrote: