开云体育

I tried something similar, but I saved the "Dual Watch" configuration as an img file, then reloaded that. I got the same results. I couldn't find a choice in Chirp that reset the radio to default. I

Interesting, as I've never encountered that with several UV-5R before. The only thing that I can suggest would be, using chirp, to save a CSV file of what you have programmed in already, resetting the

Hi, I'm new to the group. I searched the messages for this topic but didn't find anything. I am trying to get Dual Watch to work on my UV-5R. When I go to the Menu, it says the TDR is ON. But when I

Bill, I was amused by your comments regarding both Steve Jobs and SIR Clive Sinclair, simply because Steve Jobs made me very wealthy having bought stock at $18 a share and then having it go to $650

Not dumb, cheap. If you can engineer multiple things to flow through one pathway instead of 2, you save pennies.? Volume fidelity, tubes, transistors, generators or cars, even animals, are generally

Eric, I owe you an apology. I didn't see how adjusting volume could possibly matter but right around 50% seems to have done the trick (CHIRP). It's the dumbest thing I've ever seen. Thank you again.

Tried, same result, in Chinese.

You're funny.

try this software

Have you tried adjusting the volume of the radio? Too loud or too quiet and it will not sync.

More info... I installed the CPS from the Radioddity site and it also does not work. Settings -> Port COM1 Program -> Read form radio Click Start "hand shake..." "failure!" My gut feeling is that the

First post here, hello. I was gifted a UV-5RX3 and I am unable to get CHIRP (next) to read it. I have selected the Radioddity UV-5RX3 model and the correct com ports - which is either a real Serial

Eddie, Squelch on my Baofengs are all set for 2. Otherwise, you may be between a rock and a hard place.? I've had nothing but trouble with Chirp.? I'd say keep looking on RT Systems almost daily

I have a quick question for the group. I have purchased a Baofeng VU16 Pro (Dual Band model). Somehow I have overwritten the base file I had saved when I got the radio before I started programming it

Thanks, Bob. A1) Yes, I can hear the repeater with tone turned off. A2) Yes, there is a nearby uncoordinated repeater on the same frequency that often breaks squelch but is weak signal and

You have said that you can't hear a repeater that transmits a ctcss tone when you have the ctcss receive turned on. Q 1) can you hear the same repeater without the ctcss receive turned on? Q2) if

I have one that works just fine.? I use the RT Systems programmer for it, as I do on nearly all of my radios. ?Dave Springer, N0TXJ Get BlueMail for Android ?

Hi Donald: I'll second that. In 2012 I got my Technician's license and bought a UV-5R as my first amateur radio. After setting it up and programming all the local repeaters, I found I could hear

Rich . . . wrote: With the type of issue you are having, I would not recommend buying RT Systems software because I doubt you'll get different results. Of course, you can try, but I'd be surprised if

Thanks for the replies. I have loaded the UV-5rx software and it reads and writes to the radio properly. When I use the software to read the radio Frequency Range setting, it read the setting which is