In article <db3cc3b3-0fdf-e97b-3645-d6f27e731237@...>,
Richard edelec@... [7x12minilathe] <7x12minilathe@...>
wrote:
I do not disagree with most of what you have said, but if you own a
lathe then you tend to need to double up on some tooling. Expensive for
the Hobbyist.
I too have a lathe, that's why I am here.
R8 to MT2 adaptors are cheap and easily available. The mill/drill came
with a chuck and the adaptor allows me to use MT2 drills when I need to.
--
Stuart.
