Those
set screws with the lock nuts are factory set, which means nothing depending on
who set them at the factory.
Mine
were set correctly so I never needed to adjust them.
?
If
when?you?lift up on the front and rear of the carriage and it does not
move, but the carriage can still slide the entire length of the bed freely, then
the carriage is probably adjusted correctly.
?
What
you did was not a mistake, just a little extra learning experience.
Michael - USA
Micro-Mark MicroLux
7x16
toggle quoted message
Show quoted text
?
I have already changed the set screws with the lock nuts trying to get down
to the 1 mil gap is that .001 inch? I have about .008 gap at front of saddle
maybe .005 at back. I gave up spent a few hrs working on it needed to quit for
tonight.The saddle moves very nicely seems to have no play haven't tried a cut
yet. Did I make a mistake touching the set screws its very frustrating to
adjust.
Bill
