On 2/23/2020 9:23 AM, Chris Hibbert wrote:
Brand new owner and want to buy a good Lenox blade. I¡¯ll be cutting bar stock from 1/4¡± through 1¡± and angle iron up to 2¡±x2¡±x1/4¡± and square tubing 1/8¡± thick 2¡±x2¡±. All mild steel. What would be my best blade selection if I only selected one blade? Many thanks.
? I like a bimetal 10/14 for most cutting . Sometimes I put a finer blade on for thin stock . Rule of thumb is that you need at least 3 teeth in the material you're cutting . I've stripped teeth by not following that rule ... and blades ain't cheap so I'm more careful now .
? --
? Snag
