I suggest a bi-metal 10-14 tooth. That is all I use for everything, for steel, aluminum, bronze, and plastics.?
Lenox is an excellent choice.?
I started using Irwin blades several years ago, when Enco quit stocking Lenox. ?They don¡¯t last quite as long, but the cost half what a Lenox does.?
toggle quoted message
Show quoted text
On Feb 23, 2020, at 7:23 AM, Chris Hibbert <chris.hibbert@...> wrote:
?Brand new owner and want to buy a good Lenox blade. I¡¯ll be cutting bar stock from 1/4¡± through 1¡± and angle iron up to 2¡±x2¡±x1/4¡± and square tubing 1/8¡± thick 2¡±x2¡±. All mild steel. What would be my best blade selection if I only selected one
blade? Many thanks.
