¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Yccc-So2r
  2. Messages
Single Messages Topics Expanded

Re: SO2R box utility bug

 

SO2R state 0x07 means that TX2 is selected, RX2 is selected, and Stereo is selected.? That is what you are setting so it is correct.

The only things I can think of are that the SO2R Box firmware is corrupt or that something is wrong with the computer.? I suggest you re-install the firmware on the SO2R Box.? You can do this with the utility.? If that doesn't work can you try it with another computer?

??? Paul, K1XM

On Thu, Sep 26, 2024 at 3:05?AM Markku Oksanen <markku.a.oksanen@...> wrote:
Hi

Now I can see what the OTHER HW glitch is.? When I press Stereo, PTT is set and this is seen in my other interface card based control HW.
IT is NOT a HID device conflict as the control HW is connected to another PC, however it watches PTT.? This is PTT that goes first to the radio from the SO2R box and then my own HW.

Now, I can consistently make the SO2R box lose connection by pushing Stereo, in verbose it says received SO2R state 0x07, then device removed.? Every 3-4 disconnects the connection recovers on its own, I mean the device removed is followed by device added.? Pressing connect recovers funtion.

I failed to mention that I am running WIN7 Ultimate X64.

Thanks

Markku
OG2A

From:?[email protected] <[email protected]> on behalf of Paul Young <k1xm@...>
Sent:?Thursday, September 26, 2024 12:52 AM
To:?[email protected] <[email protected]>
Subject:?Re: [yccc-so2r] SO2R box utility bug
?
I don't think the utility has a way to save the log.? It is pretty old.? The best thing to do is to take a snapshot of the window.

??? Paul

On Wed, Sep 25, 2024 at 12:05?PM Markku Oksanen <markku.a.oksanen@...> wrote:
Really looks like I must have an other HID device on my system that "likes not" the SO2R box connection.
How could I figure out ?what it is??
Markku

From:?[email protected]?<[email protected]> on behalf of Markku Oksanen <markku.a.oksanen@...>
Sent:?Wednesday, September 25, 2024 5:44 PM
To:?[email protected]?<[email protected]>
Subject:?Re: [yccc-so2r] SO2R box utility bug
?
Hi

Just turned things OFF.
Did verbose
However the SW is not supporting copy/paste for this email.
Is there a log to send?
Click RX R2, TX R2.
Click Stereo
HOWever, I see that one OTHER SW on my setup sees a glitch with recovery for that HW and all is well afterwards.
This is a interface card by velleman.
Perhaps this is a particular local issue.

Is there a way to make sure the the HID devices for sure have different addrs/whatever??

Markku




From:?[email protected]?<[email protected]> on behalf of Paul Young <k1xm@...>
Sent:?Wednesday, September 25, 2024 5:27 PM
To:?[email protected]?<[email protected]>
Subject:?Re: [yccc-so2r] SO2R box utility bug
?
I just tried the same steps and it worked with my SO2R Box.? I am running the same utility and firmware versions.

Could you click verbose Output on the SO2R Box Utility and then try those steps agan?? You can send the output directly to me rather than to the group.

??? Paul, K1XM

On Wed, Sep 25, 2024 at 10:18?AM Markku Oksanen <markku.a.oksanen@...> wrote:
Hi Paul,

Well this is what IT support should look?like ?:

I am using firmware 1.6.0 and the utility says version 1.8.0.

I just did the reset, it says
Device removed
Device attached
And when I click "connect" I get connected + SO2R box version 1.6.0.
I click on RX Radio 2
TX Radio 2
Then click Stereo.
I get Device removed.
Trying "connect" says Not Connected.
Turning the HW off allows me to get the Connected SO2RBox Version 2..6.-0.

I changed a bit of wiring such that my remote AC switch turns off ALSO this box, so I am OK for now.

Thanks!
Markku
Join [email protected] to automatically receive all group messages.