¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Leaky bouyancy tanks


 

¿ªÔÆÌåÓý

Hi Jonathan,

On 23/04/2022 17:28, Jonathan Daniel via groups.io wrote:
Hi all, I'm still having an issue with water getting in to the front bouyancy compartment. I've checked all the keelband screws and re-sealed them but it's still filling up. After some wild weather today it had loads in it. But with the hull dry afterwards nothing is coming back out. Anyone have any idea how the water is still getting in?

I also found water in the side tanks. My old boat is a pre-MD conversion but I have inspection hatches at the rear of the side tanks. Does anyone know if these are connected to the front compartment hence water getting in there, or are these leaking themselves somewhere?

The front tank is connected to the side tanks - it is all one big tank.

On mine there were cracks on the floor that were letting water through into the tank - especially on the port side where there wasn't much adhesive holding everything together. If you can see any cracks in the tank molding then worth grinding back a bit for adhesion and putting some epoxy and tape over the top.

Cheers

Martin


Join [email protected] to automatically receive all group messages.