Jean-Claude,
The 2N3866 post amp would not be needed. I get sufficient output from
my pre-amp/mixer to drive the SR30.
Bob WA6UFQ
toggle quoted message
Show quoted text
--- In softrock40@..., "jabauzit" <jabauzit@y...> wrote:
Hello all,
First: I did not receive my Softrock-40 yet and everyday new software
popups for it. I guess that I will have trouble to choose when I
receive it.
Thanks to all the developpers for all these neat applications.
I have been interested in SDRs since I discovered Flex Radio a few
years back and the SR-40 will be a good start to experiment.
I am a 6m op and my dream is to developp one exclusively for 6m.
The SDR-1000 does 6m, but it seems it is by chance:
No PA has been developped for it
I did not find any review for the 6m part
The DDS is at is upper limit for 6m and I guess that the spurs are
more of a problem on these frequencies.
My idea is to use a SDR as a variable IF with a downconverter ahead.
The new SDR Version 5 by Tony would be a good start to experiment.
Any idea would be welcome. On my side this is what I think:
A not so high gain preamp (U310 with 10dB gain).
A diode balance mixed (SBL-1 / TUF-1)
A post mixed amplifier (2N3866) followed by an attenuator pad (how
much attenuation?)
A SR Version 5 tunable on 9Mhz (or any other suitable IF)
If that works what about a more high performance SDR. I tried to find
schematics of the latest QSD used in the SDR-100 but did not find
anything.
Jean-Claude PJ2BVU
