¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: SoftRock RX Ensemble II HF Receive receiving problem


 

¿ªÔÆÌåÓý

Are the sound levels in each channel equal, they should be very close to the same sound level.
?
Did you build this or buy a pre-built RX II?
?
What are the level differences in the LSB and USB signals of the same transmission.? If one signal is 40 or more DB lower than the other it might just be caused by a slight sound level imbalance.? I use a Delta 44 with PowerSDR 2.4.4 with a RX II and don¡¯t notice the ¡°image¡± signals at all.? Although if I started looking for the image signal I might find some very weak image signals from very strong signals.
?
Mike? W6MXV
?

Sent: Monday, April 07, 2014 12:31 PM
Subject: RE: [softrock40] SoftRock RX Ensemble II HF Receive receiving problem
?


Dear Mike Hi

Thank you for your reply.

I am in Stereo in Win.

The sound is present in both channels.

There is no sort circuit in the audio.

I am using the Flex Radio? PowerSDR V 2.4.4 with the Build from SV1EIA.

In the settings of the Delta 44 both channels are working.

I hope that I am replying with? all the details that you have asked for.

Thank you again

Best 73

DE

Nick SV1VS

?

From: softrock40@... [mailto:softrock40@...] On Behalf Of MICHAEL TALLENT
Sent: Monday, 07 April, 2014 18:29
To: softrock40@...
Subject: Re: [softrock40] SoftRock RX Ensemble II HF Receive receiving problem

?




You don¡¯t have both sound channels working or there is a big un-balance in the levels or timing of the stereo sound out of the RX II.? You may have windows set to ¡°mono¡± sound which would cause the same problem.? What SDR software are you using?

Did you build the RX II?

?

Mike? W6MXV

?

?

Sent: Monday, April 07, 2014 9:11 AM

Subject: [softrock40] SoftRock RX Ensemble II HF Receive receiving problem

?




?

?

Hi to All.

I want to ask if anybody has find any receiving problem with the SoftRock RX Ensemble II HF Receive

in the same band hearing the same station with two type of modulation? ( USB and LSB ) with? a difference of about 20Khz one from each other .It happens in all bands from 80m to 10m.

It is happening in two units working with different sound cards ( the one with creative usb SBX PRO STUDIO and the other with the Delta 44 ) , with win 7 64 bit? , antennas Mosley Pro 67 C-3? 7el yagi and? STEP IR? 5el? yagi.

Thank you

73

DE

SV1VS Nick




Join [email protected] to automatically receive all group messages.