Also, I don't have PayPal. May I pay by Cashier's
Check?
Bill
KA0VXK
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Monday, November 07, 2005 14:07
PM
Subject: Re: [softrock40] SoftRock v5.0
kits may soon be ordered
Hi Bill,
?
The UCB is for use with the SDR-1000 and provides
expanded external I/O.? Not needed in general.
?
73,
Tony KB9YIG
?
----- Original Message -----
Sent: Monday, November 07, 2005 2:57
PM
Subject: Re: [softrock40] SoftRock v5.0
kits may soon be ordered
I did not see a cost for the Universal Control Board. This
is a first time order.
Do I need one?
Sri abt the ignorance.
Bill
KA0VXK
----- Original Message -----
Sent: Sunday, November 06, 2005 21:20
PM
Subject: Re: [softrock40] SoftRock
v5.0 kits may soon be ordered
Hi Art,
I have all the parts for the alpha kit
ready to send except for the toroid
cores.? I was informed they
were shipped last Monday from Florida, so I am
kind of wondering if it
is really so.? I have held off on sending the alpha
kits until I
had the cores in hand, but may need to reorder the cores from
some
other source.
So far three of the alpha kits have been built (with
the few toroids I had)
and are working very nicely.? Performance
has looked good enough to head for
a kit run at the end of
November.
Sorry for the delay on getting the alpha kits
out.
73,
Tony KB9YIG
----- Original Message -----
From: "KY1K"
To:
Sent: Sunday, November 06, 2005
10:11 PM
Subject: Re: [softrock40] SoftRock v5.0 kits may soon be
ordered
> Hi Tony,
>
> Did the alpha test plans
fall through???
>
> Should I go ahead and order 2 kits, or
will the alpha test kit arrive
> soon? So far
nothing.......
>
> Hope everything is OK.
>
>
Regards,
>
> Art
>
>
> At 09:18 PM
11/6/2005, you wrote:
>
>>Good Evening
All,
>>
>>After a number of tests with the new v5.0
SoftRock I have deceided
>>it is ready for kit production.?
Orders may be placed as soon as the
>>ordering system is setup at
Dale's (WA8SRA) HamSDR website
>>(
Kit deliveries will start at the
>>end of this
month.
>>
>>Three kits will be offered as
follows:
>>
>>1) SoftRock v5.0 QSD kit at $19 per kit
(US/Canada, $20 for DX).
>>This is the lower board in the two
board stack and contains the 5
>>VDC regulator, two voltage
comparators, the QSD quad switch, and the
>>dual low-noise audio
amplifier.? All components to build the board
>>will be
provided in this kit and also a stereo audio cable will
be
>>included.? However, no RG174 coax cable or the BNC
connector will be
>>provided in the kit. (400 kits are
planned)
>>
>>2) SoftRock v5.0 Low Band OSC/BPF kit at
$7.50 per kit (US/Canada,
>>$8.50 for DX).? This is the
upper board in the two board stack and
>>contains the oscillator
circuit, the quadrature clock phase shift
>>network and the
BPF.? The fundamental frequency xtal will not be
>>included
in the kit but components will be provided for use over
the
>>bands from 80 meters to 30 meters. (750 kits are
planned)
>>
>>3) SoftRock v5.0 High Band OSC/BPF kit at
$7.50 per kit (US/Canada,
>>$8.50 for DX).? This is again
the upper board and contains the
>>components for use of the
SoftRock at 20 meters and above.? (250
>>kits are planned.
Good operation at 20 meters has been demonstrated
>>but operation
at bands avove 20 meters has not been done at
this
>>date.)
>>
>>When the ordering system is
in place, I will post on the Yahoo
>>group. Please enter your
order and confirm your order information
>>before sending any
payment.? Preferred payment methode will be by
>>PayPal at
user raparks@... .
>>
>>Thanks and
73,
>>Tony Parks
KB9YIG
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>Yahoo!
Groups
Links
>>
>>
>>
>>
>
>
>
>
>
>
Yahoo! Groups Links
>
>
>
>
>
>
