kb9yig wrote:
Good Morning All,
Orders are now being accepted for SoftRock v5.0 kit deliveries
starting at the end of November.
Orders may be placed at the PROJECTS tab on Dale's (WA8SRA) HamSDR
website .
Three kits are offered as follows:
1) SoftRock v5.0 QSD kit at $19 per kit (US/Canada, $20 for DX).
This is the lower board in the two board stack and contains the 5
VDC regulator, two voltage comparators, the QSD quad switch, and the
dual low-noise audio amplifier. All components to build the board
will be provided in this kit and also a stereo audio cable will be
included. However, no RG174 coax cable or the BNC connector will be
provided in the kit. (400 kits are planned)
2) SoftRock v5.0 Low Band OSC/BPF kit at $7.50 per kit (US/Canada,
$8.50 for DX). This is the upper board in the two board stack and
contains the oscillator circuit, the quadrature clock phase shift
network and the BPF. The fundamental frequency xtal will not be
included in the kit but components will be provided for use over the
bands from 80 meters to 30 meters. (750 kits are planned)
3) SoftRock v5.0 High Band OSC/BPF kit at $7.50 per kit (US/Canada,
$8.50 for DX). This is again the upper board and contains the
components for use of the SoftRock at 20 meters and above. (250
kits are planned. Good operation at 20 meters has been demonstrated
but operation at bands avove 20 meters has not been done at this
date.)
After confirming your order, the preferred payment method is by
PayPal at user name raparks@... .
Thanks for your interest in this ongoing SDR project.
73,
Tony Parks KB9YIG
Hi Tony,
Am I missing something? I don't see a "Projects" tab on the home page of the site.
Milt,
W8NUE
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 11/5/2005
