开云体育

Hi These are the only drill bits i have all are mm: *.3* *.4* *.5* *.6* *.7* *.8* *.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 3.05 * but when i try to make a drill file it tells me its not

Howard, You seem to be missing a couple of ranges: Emacs! There is nothing between 2.01mm and 2.4mm and nothing between 2.51mm and 3mm You need to cover these ranges in some manner. HTH

Polib mě prdel debile!!! Odesláno z mého Redmi Note 4 Dne "Howard632 via groups.io" <howard632@...>, 25. 10. 2021 6:50 odp. napsal(a): Heres the revised file

Yeah The it is You skipped a range between 0.900mm and 1.900mm: T04 0.900mm 0.801mm 0.900mm 1.5in T05 2.000mm 1.900mm 2.000mm 1.5in But good job overall! Cheers MC [email protected]> wrote:

Heres the revised file

HI Thanks john for that !! Howard

Howard, Not having your revised file, I can only go on the one submitted. Looking at the ranges for your called out drill size, there is none if you just corrected the original file T04 0.900mm

Hi Well thats good to know i got something right !! I have amended the file as you have suggested but now when i run pcbgcode in eagle it gives me a few popups saying the same thing rack

Thanks Art, you 'da man! I noticed T04 has spaces instead of a tab between the drill_size and the minimum. pcb-gcode needs a single tab between the columns. -- John

Howard, To me, you layout appears proper and correct. However, Instead of making the min and max size exactly the same, I would use overlapping ranges. I beleive your thinking that these are the drill

Hi I think i have made a drill rack file ??? would anyone look at it to see if it is done the right way i use notepad++ and set the tab space to 12 as it says in the file Thanks Howard

Yes, look in the "pcbgcode.pdf" file that is in your docs folder from when you unzipped the download and look for 4.3 Drill Rack Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HiSo I need to edit the file and put in some M6 tool change institutions to tell it to return to safe so drill change can be done there are 3 different sizes0.60000.90003.0000Am new to all this cnc

Howard, I opened your attached etch file and all appears ok to me. It basically contains G0 and G1 commands and there are no M6 (tool change commands). I will take a wild stab at this point and those

Hi it seems Error 20 – STATUS_GCODE_UNSUPPORTED_COMMAND Unsupported or invalid g-code command found in block. I have added the .nc file from pcbgcode 3.6.24 maybe someone can find what the prob is

HiI was just about to message to say that I found that after a long search and yes it works very wellHowardSent from Samsung Mobile on O2

Hi Well i was able to make a .nc drill file using pcbgcode with Mcnugget6750 as the output to see if that would work on my 3018 cnc, well it seems to be the right format Iam using Candle software ver

From a very old post, you might try: edit pcb-gcode-setup.ulp and delete lines 503-505 containing the code "<a href=http://groups.yahoo.com/group/pcb-gcode>" "<img src='docs/images/pcbgcode-600.gif'

Hi All Am just trying to set up pcbgcode on eagle 9.6.2 but the window is to big and i cannot see all the options is there a way to alter this so that i can see it all Thanks Howard

Hi Richard, Going to ask the obvious questions - sorry!! You have set a milling depth on the opening setup page? Check on the machine setup that you have milling parameters set up there as well (XY