开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Topics

SteppIR Yagi flow needed

 

Hi all

I had modified a SteppIR flow 2 1/2 yrs ago for a MonstIR at the remote station in Hawaii. It worked great!

Stupid me never made a good backup after the work I did.

Anyone have a copy I sent them or a good working SteppIR flow?

I have a couple but have links to other flows or are for multiple radios. I am looking for a simple flow that has Tracking On & Off, Home, Calibrate, 180 and ability to take frequency in from radio (Flex 6400)

I know I have sent the flow I did to others on the group.

73
Dave wo2x
Sent from my waxed string and tin cans.
 

I've got one for you. I'm at work at the moment, but I'll post one this evening.?
 

开云体育

Thanks Patrick

I have a flow mostly working and allows tracking the Flex TX freq. please send yours and I’ll check it out.?

73
Dave wo2x
Sent from my waxed string and tin cans.?

On Apr 11, 2025, at 10:53?AM, Patrick Lenn via groups.io <nwmtech@...> wrote:

?
I've got one for you. I'm at work at the moment, but I'll post one this evening.?
 

Here you go. The bottom portion is about 80% perfected. It's just an option to control which Flex Slice is sending TX frequency to the SteppIR. It works fairly well, but get will run into an empty message issue if switching back and forth between slices without a slight slice frequency change. I'm just not experienced enough to figure it out yet, but it's not a big deal.?
?
I've also got it setup with a personal Freq Sync option. Basically puts the SteppIR into AUTOTRACK, but stops the frequency message flow to the controller. I then use the SYNC button to send the message to the controller and have it follow. I also have a StreamDeck button that commands the sync as well. Works really well if you're operating with a SteppIR and multiple slices on a Flex. Then it's not constantly tuning when you move your TX slice. Mess around with it and it will make more sense.?

SteppIR_flow_W7IB.json
SteppIR_flow_W7IB.json

 

开云体育

Thanks. I wrote a new flow which works, but will check yours. I can send mine along as well.?

I added Normal, 180, Bi-directional buttons. Also Home and Calibrate. Then added a Manual/Tracking. It stores flow variables for switching. ?I used UI Template nodes for buttons as I like the CSS on them.?

I also have built an Alpha 9500 flow based on some old work by Stu K6TU

I went on last night and was s9 +10 into NC from HI. Guess it works.?

Thanks
Dave
Sent from my waxed string and tin cans.?

On Apr 12, 2025, at 3:55?PM, Patrick Lenn via groups.io <nwmtech@...> wrote:

?
Here you go. The bottom portion is about 80% perfected. It's just an option to control which Flex Slice is sending TX frequency to the SteppIR. It works fairly well, but get will run into an empty message issue if switching back and forth between slices without a slight slice frequency change. I'm just not experienced enough to figure it out yet, but it's not a big deal.?
?
I've also got it setup with a personal Freq Sync option. Basically puts the SteppIR into AUTOTRACK, but stops the frequency message flow to the controller. I then use the SYNC button to send the message to the controller and have it follow. I also have a StreamDeck button that commands the sync as well. Works really well if you're operating with a SteppIR and multiple slices on a Flex. Then it's not constantly tuning when you move your TX slice. Mess around with it and it will make more sense.?
<SteppIR_flow_W7IB.json>
 

开云体育

Hi Patrick

I was checking the Hawaii station today.

Seems I have an intermittent “bug” with the SteppIR flow I wrote. I am going to load yours and modify for the 6400.?

I’ll let you know what I find.?

I do have the documentation on the SDA2000 API commands which are same as the SDA100 so shouldn’t be hard to figure out.?

73 & thanks again.?
Dave wo2x
Sent from my waxed string and tin cans.?

On Apr 12, 2025, at 4:11?PM, Dave <rocketnj@...> wrote:

?Thanks. I wrote a new flow which works, but will check yours. I can send mine along as well.?

I added Normal, 180, Bi-directional buttons. Also Home and Calibrate. Then added a Manual/Tracking. It stores flow variables for switching. ?I used UI Template nodes for buttons as I like the CSS on them.?

I also have built an Alpha 9500 flow based on some old work by Stu K6TU

I went on last night and was s9 +10 into NC from HI. Guess it works.?

Thanks
Dave
Sent from my waxed string and tin cans.?

On Apr 12, 2025, at 3:55?PM, Patrick Lenn via groups.io <nwmtech@...> wrote:

?
Here you go. The bottom portion is about 80% perfected. It's just an option to control which Flex Slice is sending TX frequency to the SteppIR. It works fairly well, but get will run into an empty message issue if switching back and forth between slices without a slight slice frequency change. I'm just not experienced enough to figure it out yet, but it's not a big deal.?
?
I've also got it setup with a personal Freq Sync option. Basically puts the SteppIR into AUTOTRACK, but stops the frequency message flow to the controller. I then use the SYNC button to send the message to the controller and have it follow. I also have a StreamDeck button that commands the sync as well. Works really well if you're operating with a SteppIR and multiple slices on a Flex. Then it's not constantly tuning when you move your TX slice. Mess around with it and it will make more sense.?
<SteppIR_flow_W7IB.json>

1 - 6 of 6