开云体育

Hi Ron.? Just started playing with this and love it.? Thanks for all the hard work.? The only problem I have seems to be a delay in the dashboard updating.? That is, if I click the Input button

Hi Warren I just send you a copy of my rotor flow.... I just can't figure out why I can get the correct info out when I use telnet....and I can see the command going in to ser2net but the answer out

Ben, Are you using the TCP Request node to poll ser2net?? (That's what I do)? I can't tell what your flow is doing from your screen shot. Warren, KD4Z

John, There is a extra space in the HTML tag. This is fixed already in the new rolling release(dev) mode. This is been mentioned also in #9710 ( /g/nodered-hamradio/message/9710 ).

Thanx Connor Also, have a look at the 'Exchange' field on the dashboard image below. It's showing CSS info. Might have a slight typo in it. This is the latest download from Kyle's Github from a day

General Note for all #contest-dashboard members: For all those discussing about the Node-Red Contesting Dashboard, please add #contest-dashboard to the subject line of any new topic so the messages

Hi Patrick The “fix” for PG XL showing high SWR in Joe’s case was to disable the original PG XL flow he had installed then download and install the Power Genius v16 flow from the file section of

Kyle What's the difference in usage between the new flow.json & package.json? And is there a version indication in the update? If not, how do I tell the update has been? successful? Regards John

Glad u got it going. I don’t have an LP100 but will soon connect my LP700 to Node Red. 73 Dave wo2x Sent from my waxed string and tin cans.

Never mind, Dave... I (finally) figured out how to get data flowing! After re-reading this thread for about the 4th time, I noticed that Ed's flow started working when you changed the input serial

Thanks for the response, Dave. I only have one Prolific adapter (I'm aware of the address issues with using more than one), and in fact I swapped it out yesterday for a FTDI adapter.? Both the

Still waiting for Joe to get back to me so I can debug why the flow is not working. Patrick, feel free to contact me direct. My call at arrl.net 73 Dave wo2x Sent: Sunday, January 8, 2023 2:11 PM To:

Thanks Scott, I'm 99% sure the permission thing is a Ubuntu snap 'feature' if I get the strength I'll see what I can do to fix it. Interestingly I didn't have the 0xFE and 0xFD in the boxes I'll give

Was there ever a conclusion to this?

I have downgrade my ser2net to ver.3.5 as the last ver is unstable and having problem to get it to start, when I use telnet my K3ng rotor I can get my AZ-readings out , and this is ok if I put a

Alex, I loaded in your flow, changed the CI-V address to match my IC-7610 and ran it. I don't know why you are getting permission denied errors. That often implies that another program is attempting

If you are using multiple Prolific adapters, you can have issues as the enumeration can be incorrect. Open the Serial In node and make sure the line Optionally wait for a start character of then Is

Louis, Following is link to json I wrote to interface with my ACOM 600S serial port.? This was less expensive than using the ACOM e-Box ethernet interface (for 600S, 700S, 1200S, ...) selling for

Hi Alex If you hit a roadblock, you may want to consider using the HamLib and the HamLib Daemon next. When you use HamLib, HamLib does all the communication with the radio for you and then you use

So a little more progress, only not using this flow I wanted to make sure that there wasn't something missing with the rig so using rigctld I can set a session up on the RPi and can connect to it