Due to server capacity, the Contest Online Scoreboard data inside the Node Red Contest Dashboard is unavailable.? Victor and team are working on right sizing the servers for additional load.?? Here is the error message you will receive in the debug window.??  To stop the error, you can disable the HTTP request node in the Online Scoreboard tab (in the node editor) to mute the errors until the issue is resolved.??  Thanks and sorry for in inconvenience. 73 Kyle AA0Z?
|
Re: Exchange in HTML format?
Do you have SQLite 3 install with the schema.db configured properly. See to make sure the SQLite3 is up and running. Then make sure that the database is connected in Node-Red.
Thanks and 73,
Connor KD9LSV
|
Re: SPE Linear V1.1 flow uploaded to files section
Frank, that looks good. I and V should be side by side in my mind and that is what you did. If you have any suggestions the suggestion box is open. Maybe some what delayed as Adrian witnessed and I have not forgotten about his suggestions. I need a few days of concentrated Node Red time and I just haven't had a window like that.
73, Ron WB2WGH?
On Mon, Jan 2, 2023, 1:39 PM Frank N6OI < kibbish@...> wrote: OK, I decided to take a stab at removing the two meters that I don't need for the 1.3K-FA.? After doing that and playing around with spacers a bit, I ended up with just one spacer and a rearrangement of some of the other nodes.? I'm not sure the organization is exactly what I want, but it's at least a cleaner look now that the two non-functioning meters have been removed.
73,
?Frank N6OI
|
Re: SPE Linear V1.1 flow uploaded to files section
OK, I decided to take a stab at removing the two meters that I don't need for the 1.3K-FA.? After doing that and playing around with spacers a bit, I ended up with just one spacer and a rearrangement of some of the other nodes.? I'm not sure the organization is exactly what I want, but it's at least a cleaner look now that the two non-functioning meters have been removed. 73, ?Frank N6OI 
|
Re: Exchange in HTML format?
Fixed Connor,
I found that under windows 11, the backup function didn't work.
I simply removed the %userprofile% variable and everything is now saved correctly (thus, lat/long data are kept into the file)
BTW, don't want to take much from your time.
I have now the following issue (no such table: radio) but let me know if you prefer me to open another ticket:
Everything "looks" normal but not sure if this is a problem or not.
Thanks again for the quick help.
Fulvio HB9DHG
|
Re: Exchange in HTML format?
you're just missing variables that you need to input like your Lat and long.
|
Re: Exchange in HTML format?
Thanks Connor!
Glad I was able to help in any form.
In the meantime I'm still struggling with this issue (see picture)
If you have anything in mind, let me know. Otherwise I will try to open a new topic.
Happy new year guys!
Fulvio HB9DHG
|
Re: Exchange in HTML format?
Fulvio,
Thanks for finding the problem.
This has been fixed and is scheduled to be deployed in the release that is coming up shortly.
73,
Connor KD9LSV.
|
Re: Exchange in HTML format?
Thanks Kyle!
I think I've figured it out by removing a space between the < and the f of "font".
I'm not working any contest, simply started N1mm with one of the contest I made (LZDX)
not sure if this happens with all contest, but glad I found the solution.
HB9DHG Fulvio
|
Re: Exchange in HTML format?
Fulvio,? what exchange are you expecting and what contest are you working?? Could be a bug based on what N1MM is sending.
|
Dear all, Finally working with the N1mm-Dashboard both under Rasperry and Windows 11. On the dashboard, the Exchange field is not showed correctly. See screenshot. Anyone can shed some lights? The same issue happens on Linux and Windows. 73 de HB9DHG Fulvio 
|
Here is to a better year with good health! Thanks for all the help and support!
? Watts
? ?K4QJZ
|
Suggestions for WiKi section
Hi all
Happy New Year to everyone and may 2023 bring good health and peace to all.
Kyle submitted a write up I will add to the WiKi section for the ERC setup with Node Red.
If anyone else would like to contribute, feel free to post here or email me direct. Others in the group can benefit from our experiences.
73
Dave wo2x
Sent from my waxed string and tin cans.
|
Dave,
We love you brother. Stay healthy. Happy New Year!
--
73,
Ed KA9EES
|
Probably out of band :-)
Glad to hear you are doing better!
toggle quoted message
Show quoted text
On Dec 29, 2022, at 7:11 PM, Dave wo2x <RocketNJ@...> wrote:
? Nope, it was a bootlegger!
Dave wo2x
? ? ? On Wed, Dec 28, 2022 at 05:35 PM, Dave wo2x wrote: cardiac RF ablation
Now, for the important question:? Did you get a QSL Card? ;-)
Take care.
73 de N0UI
|
Dave:
Glad you're feeling better. Take care of yourself !!?
Charlie KB8CR
|
|
|
On Wed, Dec 28, 2022 at 05:35 PM, Dave wo2x wrote:
cardiac RF ablation
Now, for the important question:? Did you get a QSL Card? ;-) Take care. 73 de N0UI
|
Re: SPE Linear V1.1 flow uploaded to files section
Frank, glad that helps. You could put some spacers in to preserve the layout. I haven't worked with spacers much but I think that would work. Any other questions, let me know. I know Adrian, VK4TUX, is probably listening and he has some suggested enhancements?for the SPE flow. As part of that enhancement (timing TBD) I plan to add an "Auxiliary" dashboard widget that includes some of the lesser utilized API functions. That relegates lesser used functions to a widget that can be disabled without affecting the primary widget functions.
73 an have a happy and healthy New Year, Ron WB2WGH
On Thu, Dec 29, 2022 at 7:48 PM Frank N6OI < kibbish@...> wrote: Hey Ron;
Yup, that makes perfect sense.? First of all, I didn't realize that the "Temp Lower" and "Temp (Combiner)" only applied to the 2K.? Now that you have pointed it out it makes sense, but I hadn't thought it through.? Thanks for that.
And the step I missed was resetting the min, max, seg1 and seg2 values to correspond to the correct temperatures in F.? I've now set them to 50, 90, 130 and 170 respectively, and the gauge looks great.
FYI, I picked the low value of 50 more or less at random (hopefully it'll never get that cold in the shack? hi hi), the 170 because the max operating temp of the 1.3K-FA is 75C or 167F, and then set seg1 and seg2 evenly spaced between those two values.
So I guess I should just remove the other temp gauges, but that will destroy your nice layout.? I'll have to think that through a bit before trying it.
Thanks very much for your prompt response!
73,
?Frank N6OI
|
Re: SPE Linear V1.1 flow uploaded to files section
Hey Ron;
Yup, that makes perfect sense.? First of all, I didn't realize that the "Temp Lower" and "Temp (Combiner)" only applied to the 2K.? Now that you have pointed it out it makes sense, but I hadn't thought it through.? Thanks for that.
And the step I missed was resetting the min, max, seg1 and seg2 values to correspond to the correct temperatures in F.? I've now set them to 50, 90, 130 and 170 respectively, and the gauge looks great.
FYI, I picked the low value of 50 more or less at random (hopefully it'll never get that cold in the shack? hi hi), the 170 because the max operating temp of the 1.3K-FA is 75C or 167F, and then set seg1 and seg2 evenly spaced between those two values.
So I guess I should just remove the other temp gauges, but that will destroy your nice layout.? I'll have to think that through a bit before trying it.
Thanks very much for your prompt response!
73,
?Frank N6OI
|
Kyle AA0Z
Connor KD9LSV
Frank N6OI
Fulvio HB9DHG
Dave wo2x
Edward Dowdy KA9EES