Re: AUDIO OUT node not working?
Warren,
?
I tried the site setting on the site info button and actually I prefer it to navigating the default settings.? Thx for the tip.
?
Regards
|
Re: Looking for existing flows for Hermes Lite 2+ and SPE and Yeasu Rotor ERC
Tony, I can assist eithnthe SPE and ERC flows when you're ready.
Ron WB2WGH?
Hi Scott and Ron,
?
I have seen and downloaded the SPE( I have 1.5) flows. I have not set those up yet, nor have I looked for the ERC flow yet.
?
I spent a ton of time and frustration trying to get the various SDA100 flows to work with my steppIR with minimal luck. I wonder more from connection issues (to null/crossover or not?). I started with this because it was the only piece of equipment in my shack that I didn't have some way of remoting into. Actually I don't have the Hermes set up for remote either. I think I will get away from the frustration of the SteppIR control and play with SPE flows and also the ERC... it might be a bunch more successful.
?
I assumed that I would run the Thetis on its own part of the screen and have sections for the spe, erc, and steppIR. I will look to see if Thetis can take a cat input. I know it can output Kenwood cat control because that is how I control the SPE with it.The HR50 tracks with the Hermes and the SPE tracks with Thetis via a usb to serial adapter. The steppIR tracks with the SPE. So that is doing very well. I just want to monitor and change power settings, steppIR menus, etc from the computer screen.
?
Maybe I should start off with something more conventional like my TS890 or 7100 and the SPE, SteppIR, ERC. I have been allergic to bothering those two radios as I have alternate remote software being used for them.
?
I feel like a dog chasing a car.... I wouldn't know how to drive it if I caught it ;)
?
--
Thanks, 73
Tony N7ZS
|
Re: Looking for existing flows for Hermes Lite 2+ and SPE and Yeasu Rotor ERC
Hi Scott and Ron,
?
I have seen and downloaded the SPE( I have 1.5) flows. I have not set those up yet, nor have I looked for the ERC flow yet.
?
I spent a ton of time and frustration trying to get the various SDA100 flows to work with my steppIR with minimal luck. I wonder more from connection issues (to null/crossover or not?). I started with this because it was the only piece of equipment in my shack that I didn't have some way of remoting into. Actually I don't have the Hermes set up for remote either. I think I will get away from the frustration of the SteppIR control and play with SPE flows and also the ERC... it might be a bunch more successful.
?
I assumed that I would run the Thetis on its own part of the screen and have sections for the spe, erc, and steppIR. I will look to see if Thetis can take a cat input. I know it can output Kenwood cat control because that is how I control the SPE with it.The HR50 tracks with the Hermes and the SPE tracks with Thetis via a usb to serial adapter. The steppIR tracks with the SPE. So that is doing very well. I just want to monitor and change power settings, steppIR menus, etc from the computer screen.
?
Maybe I should start off with something more conventional like my TS890 or 7100 and the SPE, SteppIR, ERC. I have been allergic to bothering those two radios as I have alternate remote software being used for them.
?
I feel like a dog chasing a car.... I wouldn't know how to drive it if I caught it ;)
?
--
Thanks, 73
Tony N7ZS
|
Re: Looking for existing flows for Hermes Lite 2+ and SPE and Yeasu Rotor ERC
Your best bet is probably going to be to talk to Thetis with Node-RED and let Thetis talk to the HL2. I have done this with another HL2 client called deskHPSDR (), but the CAT control for Thetis might be different. Post a link to the CAT control documentation for Thetis and I'll take a look.
?
Which SPE do you have?
?
73,
Scott
AK5SD
|
Re: AUDIO OUT node not working?
Thanks Mick and Marty. I did as you suggested and now it is working. Not sure why it was necessary to add the IP address when I checked the default allow sound. Anyway, now working as it should. And again, Mick, thanks for this flow. We had lots of lightning here the other night and the flow worked great. I have it 'wired' to activate a relay to disconnect my antennas when the lightning is detected within 10 miles.
73 de Arnie W8DU
|
Re: AUDIO OUT node not working?
Spot on target Mick,
?
I was about to add that you can access the site settings by clicking to the left of the URL (the Not secure button in this case)? ?Often websites will prompt you to start Chrome audio like NA5B which will set the setting for that site.
?
?
When browsing your dashboard address,
go into site settings, and see what it has configured for Sound permissions.
?
?
I've often found that "Automatic" may not always work, so choose "ON" or "Allow" to avoid the not-so-automatic issue.
?
Warren, KD4Z
?
|
Re: AUDIO OUT node not working?
Arnie,
?
I am the author of the code you are referring to.? I originally took the basic Blitortung.org flow and added the mechanized key lookup as well as the lightning alert indicator with a audio alert.? ?The audio out node? sends the output to your browser.? It appears to be working as your previous screen capture shows it 'playing'.??
?
?
Please check to ensure Chrome can play the sound .? Go to? ? chrome://settings/content/sound? ?and check to see that the dashboard has permissions to play the audio.?? ?
?
If you want to manually add a website then add it here:
?
?
This should resolve your issue.? ?
?
Regards
?
|
Re: Looking for existing flows for Hermes Lite 2+ and SPE and Yeasu Rotor ERC
Tony,?
I have a flow for the SPE (supports 1.3, 1.5 and 2K) in the files section. Flows also exist for the ERC-4 and I am using one based on one downloaded from the site.
Ron WB2WGH?
Good Evening
?
As the title says; I was hoping to find something for the HL2+ and extras.
?
My shack has multiple radios. The HL2+ is connected to a Hardrock 50 then fed into an SPE Expert. This all tracks seamlessly off of Thetis running on a 12v cube pc. I know a lot of guys use flex on here, but my search for Hermes flows ?didn¡¯t come up with anything.?
I also use a Kenwood TS890 into the SPE. On the SPE output, I have a dipole and a Stepper 3el spun by a Yeasu rotator interfacing with another computer using ERC rotor control and the SPE term.
?
I have been intrigued by node red for about a year, but my skills don¡¯t match my desire. I have attempted to grab individual flows and use them on some of my gear, with no real luck.? You guys make it look so easy!
?
My goal would be to try and build a desktop with both my radios and equipment. A bonus would be to remote into the station.
?
If anyone has time to help me out with this, it would be much appreciated.
--
Thanks, 73
Tony N7ZS
|
Looking for existing flows for Hermes Lite 2+ and SPE and Yeasu Rotor ERC
Good Evening
?
As the title says; I was hoping to find something for the HL2+ and extras.
?
My shack has multiple radios. The HL2+ is connected to a Hardrock 50 then fed into an SPE Expert. This all tracks seamlessly off of Thetis running on a 12v cube pc. I know a lot of guys use flex on here, but my search for Hermes flows ?didn¡¯t come up with anything.?
I also use a Kenwood TS890 into the SPE. On the SPE output, I have a dipole and a Stepper 3el spun by a Yeasu rotator interfacing with another computer using ERC rotor control and the SPE term.
?
I have been intrigued by node red for about a year, but my skills don¡¯t match my desire. I have attempted to grab individual flows and use them on some of my gear, with no real luck. ?You guys make it look so easy!
?
My goal would be to try and build a desktop with both my radios and equipment. A bonus would be to remote into the station.
?
If anyone has time to help me out with this, it would be much appreciated.
--
Thanks, 73
Tony N7ZS
|
Re: AUDIO OUT node not working?
Arnie
I just ran a couple of tests with the inject of text to audio out and it played on safari and chrome on my macbook.
Marty
On Thursday, April 3, 2025 at 03:52:53 PM EDT, W8DU_Arnie via groups.io <mdjdmi@...> wrote:
Thank you. I did post in inquiry. I hope someone with knowhow will respond.
73 de Arnie W8DU
|
Re: AUDIO OUT node not working?
Thank you. I did post in inquiry. I hope someone with knowhow will respond.
73 de Arnie W8DU
|
Re: AUDIO OUT node not working?
Try the maintainers on this page
Also is the contribute version of help?
On Thursday, April 3, 2025, 12:39 PM, W8DU_Arnie via groups.io <mdjdmi@...> wrote: Marty:
I went to the info page but do not see any info on the author. This node was part of the node-red-dashboard install.
How would I find contact info for the author?
Tnx de Arnie W8DU
|
Re: AUDIO OUT node not working?
Marty:
I went to the info page but do not see any info on the author. This node was part of the node-red-dashboard install.
How would I find contact info for the author?
Tnx de Arnie W8DU
|
Re: AUDIO OUT node not working?
Thanks Marty. Good suggestion. I will try that.
73 de Arnie W8DU
|
Re: AUDIO OUT node not working?
Thanks Leslie. Yes I have. Since this is happening on all of the computers I have that run Chrome, and that includes W10, W11, Linux and MacOS, but not other browsers, I think the issue is with Chrome itself.
|
Re: AUDIO OUT node not working?
Open a ticket with the node author. Go to info page of the node.
On Thursday, April 3, 2025, 11:16 AM, Leslie Hooe via groups.io <hooeld@...> wrote: Have you looked to see if there are any extensions in your Chrome Browser. I've seen extensions?do strange?stuff.
I also assume you have deleted cookies and cache..
Les K7LES No dice. I have tried it on a Macbook Chrome, Linux Mint Chrome as well as a few other W10 and W11 machines. None will talk from the Audio Out node. I have also tried using Safari and Firefox as well as Microsoft Edge. They all talk, so I have to think that Chrome has somehow prevented this node from talking. Has anyone else had a problem with the Audio Out node talking when using the Chrome browser?
|
Re: AUDIO OUT node not working?
Have you looked to see if there are any extensions in your Chrome Browser. I've seen extensions?do strange?stuff.
I also assume you have deleted cookies and cache..
Les K7LES
No dice. I have tried it on a Macbook Chrome, Linux Mint Chrome as well as a few other W10 and W11 machines. None will talk from the Audio Out node. I have also tried using Safari and Firefox as well as Microsoft Edge. They all talk, so I have to think that Chrome has somehow prevented this node from talking. Has anyone else had a problem with the Audio Out node talking when using the Chrome browser?
|
Re: AUDIO OUT node not working?
No dice. I have tried it on a Macbook Chrome, Linux Mint Chrome as well as a few other W10 and W11 machines. None will talk from the Audio Out node. I have also tried using Safari and Firefox as well as Microsoft Edge. They all talk, so I have to think that Chrome has somehow prevented this node from talking. Has anyone else had a problem with the Audio Out node talking when using the Chrome browser?
|
Re: AUDIO OUT node not working?
Oops...I stand corrected. I do hear the sound from your demo. I forgot that I had my speaker turned down because I was working some FT8 a little while ago. Sorry about the confusion.
But....I still hear no audio from my flow when using Chrome.
|
Re: Advice for building a new Node Red RPi-3B+ in 2025
Node Red does not need much horsepower. I am using it for station control and running it on a RPi Zero2W. It runs just fine on this minimal RPi!
GL de Arnie W8DU
|
Scott Dupuie