开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Messages
Expanded Topics Messages Polls
Date
Re: Remotely monitor RPi devices

 

开云体育

Here’s mine but I won’t be able to upload it until tomorrow.

73
Dave wo2x

image0.png

On Jul 1, 2022, at 10:05 PM, Mike Pate - K5MAP <k5map@...> wrote:

?On Fri, Jul 1, 2022 at 08:35 PM, David De Coons wo2x wrote:
Raspberry api Monitor flow for Node Red
Dave,

I did a Google search but not using the phrase you recommended.? Will try that again as well as search the Files section.

I wasn't clear about my setup in my original post... my remote shack is connected to my house and both are behind my firewall so fortunately I will not have to deal with the complexity of NAT/port forwarding on the firewall.
?
--
Mike / K5MAP

Re: Remotely monitor RPi devices

 

On Fri, Jul 1, 2022 at 08:35 PM, David De Coons wo2x wrote:
Raspberry api Monitor flow for Node Red
Dave,

I did a Google search but not using the phrase you recommended.? Will try that again as well as search the Files section.

I wasn't clear about my setup in my original post... my remote shack is connected to my house and both are behind my firewall so fortunately I will not have to deal with the complexity of NAT/port forwarding on the firewall.
?
--
Mike / K5MAP
Re: Remotely monitor RPi devices

 

开云体育

Yes. In the file section should be at least one flow. Also do a Google search for Raspberry api Monitor flow for Node Red. ?Sorry, not home right now.?

You’ll need to port forward at outside port to port 1880 and IP of the Pi. If multiple you can forward one port to each Pi’s IP and internal 1880 for each Pi.?

Use a dynamic DNS service so you can have a friendly name to access the Node Red dashboard remotely.?

There are ways to make it more secure such as password access to dash or using a VPN service such as TailScale.?

73
Dave wo2x

Sent from my waxed string and tin cans.?

On Jul 1, 2022, at 9:30 PM, Mike Pate - K5MAP <k5map@...> wrote:

?I have multiple RPi's in my remote shack.? I was wondering if anyone else has developed any flows to monitor the remote RPi's.? I have a flow using "ping" to monitor if the device is connected but I also want to monitor the temp, CPU, memory, etc.
--
Mike / K5MAP

Remotely monitor RPi devices

 

I have multiple RPi's in my remote shack.? I was wondering if anyone else has developed any flows to monitor the remote RPi's.? I have a flow using "ping" to monitor if the device is connected but I also want to monitor the temp, CPU, memory, etc.
--
Mike / K5MAP
Re: Question about re-install

 

开云体育

From what I can tell if you load certain flows that have CSS code that is added to the head section it can cause dark and custom theme to not work.?

I ran into the problem then uninstalled my CSS flow, deployed, then imported the CSS flow and deployed.?

Possible explanation.?

Dave wo2x

Sent from my waxed string and tin cans.?

On Jul 1, 2022, at 7:39 PM, W8DU_Arnie <mdjdmi@...> wrote:

?Got it done. Just installed them one by one using the package.json list. Works and now, so does the dark theme.
Tnx de Arnie W8DU

Re: Question about re-install

 

Got it done. Just installed them one by one using the package.json list. Works and now, so does the dark theme.
Tnx de Arnie W8DU
Re: Question about re-install

 

Mike:
I have saved the package.json in my Documents folder on the pi, but do not see how to import it back into node-red in the palette manager. Any help with this?
Tnx es 73 de Arnie W8DU
Re: Question about re-install

 

开云体育

Node Ted is really, really good at Node Red!

Damn Sphell Cheque ;-(

Sorry, weird humor.?

73
Dave wo2x

Sent from my waxed string and tin cans.?

On Jun 30, 2022, at 7:52 PM, Adrian Fewster <vk4tux@...> wrote:

?'Node Ted' ,... thanks for the chuckle with my morning coffee :)

regards

Adrian

Re: Question about re-install

 

开云体育

By running the bash script to install Node Red it only will update Node Ted to latest version. What are you trying to accomplish?

Dave wo2x

Sent from my waxed string and tin cans.?

On Jun 30, 2022, at 3:17 PM, W8DU_Arnie <mdjdmi@...> wrote:

?Thanks Dave and Mike. I will try those suggestions. I think my bottom line question is...does a re-install of node-red overwrite or delete exiting flows?
Tnx de Arnie W8DU

Re: Question about re-install

 

Thanks Dave and Mike. I will try those suggestions. I think my bottom line question is...does a re-install of node-red overwrite or delete exiting flows?
Tnx de Arnie W8DU
Re: Getting started with Node Red

 

开云体育

No, but I copied the link from the description in the files area. I’ll find the right video

?

Dave

?

?

From: [email protected] <[email protected]> On Behalf Of utarctnradio
Sent: Thursday, June 30, 2022 1:13 PM
To: [email protected]
Subject: Re: [nodered-hamradio] Getting started with Node Red

?

Thanks Dave! Was the powerline noise video the one you meant to include?

Re: 13 Colonies Dashboard

 

Updated the 13 Colonies JSON file in the files section under my callsign.? The last update.?

Changes before the event starts tomorrow at 9am Eastern
Added some CSS formatting.
Added IRC (search for irc for the install node) node to connect to the DX Summit cluster (no telnet connection for that cluster).? Here is IRC info if it doesn't carry over.? server : irc.radiochat.org channel : #CQDX
Added state abbreviation after the 1by1 callsign.?

Once connected to the IRC server and telnet cluster, will monitor all the spots and only filter the 13 colonies/bonus stations and display them in the table on the left hand side.? Feel free to add voice announcement or email notifications.?
Re: Getting started with Node Red

 

Thanks Dave! Was the powerline noise video the one you meant to include?
Re: Simple programs to run

 

Check out these Node-Red produced videos.? ?They cover all the basic elements.




--
Mick, W8BE
Re: Getting started with Node Red

 

开云体育

Here’s a zip file witl my flows from a few months ago and necessary files for Stream Deck integration

/g/nodered-hamradio/files/%211%21%20Flows%20by%20Type/MISCELLANEOUS/StreamDeckTo%20NodeRedIntegrationFiles.zip

?

Also a companion video which may help

?

?

Read the ReadMe file for information on using the flows and other files. Some have generic passwords set.

?

73

Dave wo2x

?

From: [email protected] <[email protected]> On Behalf Of utarctnradio
Sent: Wednesday, June 29, 2022 12:35 PM
To: [email protected]
Subject: Re: [nodered-hamradio] Getting started with Node Red

?

Dave,

Is there a place to download your setup specifically??
I have similar hardware and the streamdeck, but was having trouble piecing together the files to get it in one place.

Thanks

Andrew?

Re: 13 Colonies Dashboard

 

开云体育

There were three bonus stations last year, took me just under 9 hours to bag all 16. New personal record.

In addition to TM13COL you have WM3PEN and GB13COL as bonus.

Now that Xenia and my conference in Atlantic City are behind me I need to get back to Node Red.

Was working on station redesign for high power SO2R on contest bands while maintaining WARC functionality on my 5 band Yagi.?

Triplexer, diplexer and high power band pass filters ordered.?

Thinking of locating everything except radio in my garage. Monitoring ambient temp in garage.

73
Dave wo2x


On Jun 29, 2022, at 4:40 PM, Kyle K <kylekrieg@...> wrote:

?Updated 13 colonies dashboard with the TM13COL bonus station.??

Re: 13 Colonies Dashboard

 

Updated 13 colonies dashboard with the TM13COL bonus station.??
Re: Getting started with Node Red

 

Dave,

Is there a place to download your setup specifically??
I have similar hardware and the streamdeck, but was having trouble piecing together the files to get it in one place.

Thanks

Andrew?
Re: Bringing in a folder from files

 

Marty, yes import from the "hamburger" menu to import the json flow in the files section for the g90. Have not looked at the flow so don't know if there are any dependencies but you'll find that out shortly if there are.

Ron WB2WGH?

On Wed, Jun 29, 2022, 11:13 AM Marty Bluhm via <w8aks55=[email protected]> wrote:

Rather than screw this up, I thought I would ask as I can’t seem to find my answer.
I got a G90 transceiver from a ham in Ga to use as a test bed for learning node red interfacing etc.
In the files section , there is a folder with G90 flows etc.
i want to bring this onto my workspace and get familiar with it.
Am I correct in using the “import” to do this? I’ve done the update palette and install part but I’ve hit another bump in the road.
I ve followed the flows off the node red web site , coped them and they worked fine, learned a lot.
Thanks Dave wo2x for the? relay flow, working on that today.
Y’all have an enjoyable holiday and stay safe.
73
Marty
W8AKS
Bringing in a folder from files

Marty Bluhm
 

Rather than screw this up, I thought I would ask as I can’t seem to find my answer.
I got a G90 transceiver from a ham in Ga to use as a test bed for learning node red interfacing etc.
In the files section , there is a folder with G90 flows etc.
i want to bring this onto my workspace and get familiar with it.
Am I correct in using the “import” to do this? I’ve done the update palette and install part but I’ve hit another bump in the road.
I ve followed the flows off the node red web site , coped them and they worked fine, learned a lot.
Thanks Dave wo2x for the relay flow, working on that today.
Y’all have an enjoyable holiday and stay safe.
73
Marty
W8AKS
5901 - 5920 of 13744