Re: Stream Deck to Node Red
Dave, Just out of interest I replaced the toggle node in the lower flow with the one Alan attached below and the button display now switches back and forth consistently with one press, even though the lower flow is switching between 1 and zero rather than "true" and "false". I've no idea why yet as I've not looked at the json on your toggle or Alan's toggle. Whereas before it would take two button presses in one direction. This may or may not help as it's not Modbus messages. I just linked the upper and the lower flow together and switched out the toggle in the lower flow.
?
Of course, looking at your toggle json, that may not be what you were trying to achieve. i.e if was already red then leave it red, don't switch it to green and vice versa.
?
73 de G8PFR
Mike
|
Re: Sending test QSOs to the Contest Dashboard...
Just emailed you the flow and the database.? Hopefully it works for you.? It's a WPX RTTY contest.
?
sqlite3 version 3.34.1 is installed on my machine.? I think you'll need to load sqlite3 on your machine first, then the actual node in NR.? Maybe loading the node will install sqlite3?? Not sure.
?
Let me know if you have any issues.
?
Kyle
|
Re: Stream Deck to Node Red
Roger that. Thanks Alan.
?
-Randy
|
Re: Stream Deck to Node Red
Randy
?
Opps. ? ?I did not download the full flow. ?
?
Here is it again.
?
Alan
|
Re: Stream Deck to Node Red
Many thanks to Ron for the Zoom meeting, also to Alan and Dave for their huge effort in supporting the community.
Pete G0ABI?
toggle quoted message
Show quoted text
On 17 Feb 2025, at 18:06, Randy Buxton, W4IFI via groups.io <randybuxton@...> wrote:
? Alan, could you attach the json for the entire flow of the Toggle Button demonstration? I need to see the configuration of all the nodes.
?
Thanks.?
?
-Randy
|
Re: Stream Deck to Node Red
Alan, could you attach the json for the entire flow of the Toggle Button demonstration? I need to see the configuration of all the nodes.
?
Thanks.?
?
-Randy
|
Re: Stream Deck to Node Red (Zoom meeting invite)
Ron,
?
Thank you so much for organizing and leading the Zoom call.
?
Because of your help I am now able to expose the contents of a payload to logic and continue with my FT-991A streamdeck? project.
?
Best regards
?
Mel Buckpitt
?
KC1VHX
|
Re: Stream Deck to Node Red
call me.? I need to understand how the modbus works.
Alan
269-303-6396
Alan - here is the flow I'm having trouble with.? It takes 2 presses of the button on the SD to register the correct new state on the button.?
|
Re: Stream Deck to Node Red
Alan - here is the flow I'm having trouble with.? It takes 2 presses of the button on the SD to register the correct new state on the button.?
|
Re: Stream Deck to Node Red (Zoom meeting invite)
Thanks to all that attended yesterday's Node Red <-> StreamDeck session. Thanks also to Dave and Alan for assisting! I hope it met your expectations. Nathan has graciously agreed to host the recording on his YouTube channel:?. Thank you Nathan! I have also upgraded the?PDF to include StreamDeck plugins?(WebSocket Proxy) as a prerequisite. I've also referenced the FRStack Client plugin for those FlexRadio users interested in integrating StreamDeck with FRStack. If you are interested in a session on StreamDeck FRStack (for FlexRadio users) integration, let me know and I'll set something up in the next few weeks. The updated PDF is attached.
73, Ron WB2WGH
On Sat, Feb 15, 2025 at 3:02?PM Ronald Panetta < ron@...> wrote: So far I have heard from the following regarding a StreamDeck <-> Node Red integration session. Sorry if I missed anyone. Feel free to join in if I did. I've set up a Zoom meeting for Sunday, February 16 at 3PM Eastern Time (UTC-5). The meeting invite is included below. During the session I will walk through my StreamDeck to Node Red rotor flow detailed in the attached PDF. I hope this to be an interactive session and I can record it (please someone remind me to do so!).?
| Name |
Call |
| Ron Panetta |
WB2WGH |
| Randy Buxton |
W4IFI |
| Mike Gibson |
G8PFR |
| Dave de Coons |
WO2X |
| David Billstrom |
N4SZ |
Hope to see you there! 73, Ron WB2WGH
Ron Panetta is inviting you to a scheduled Zoom meeting.
Topic: Ron Panetta's Zoom Meeting
Time: Feb 16, 2025 03:00 PM Eastern Time (US and Canada)
Join Zoom Meeting
Meeting ID: 814 6610 6815
Passcode: 640582
---
One tap mobile
+19292056099,,81466106815#,,,,*640582# US (New York)
+16469313860,,81466106815#,,,,*640582# US
---
Dial by your location
? +1 929 205 6099 US (New York)
? +1 646 931 3860 US
? +1 305 224 1968 US
? +1 309 205 3325 US
? +1 312 626 6799 US (Chicago)
? +1 301 715 8592 US (Washington DC)
? +1 564 217 2000 US
? +1 669 444 9171 US
? +1 669 900 6833 US (San Jose)
? +1 689 278 1000 US
? +1 719 359 4580 US
? +1 253 205 0468 US
? +1 253 215 8782 US (Tacoma)
? +1 346 248 7799 US (Houston)
? +1 360 209 5623 US
? +1 386 347 5053 US
? +1 507 473 4847 US
Meeting ID: 814 6610 6815
Passcode: 640582
Find your local number:
On Fri, Feb 14, 2025 at 12:00?PM Ronald Panetta < ron@...> wrote: So far I have the following interested folk: - Mike, G8PFR
- Randy, W4IFI (I did a one on one with him and including?him if interested)
- Dave, N3BKV
- Dave, WO2X (including him for his awareness)
I plan to throw together a short PDF (attached) showing how I integrated my StreamDeck rotor buttons into my rotor flow. This will be the basis of what I will discuss. This may take a day or two to pull together but should help in the future. Once I have that, I'll set up a zoom session (I too have a paid account so no time limit and can record it). I also know Mike asked for a few days to resurrect?his stuff. So let me throw out some possible timeframes for a get together. These times will be US Eastern Time (UTC-5) and if they don't work, let me know.
- Sunday (Feb 16)? 3PM
- Monday (Feb 17)? 3PM
- Tuesday (Feb 18) 3PM?
If the group is small enough and it looks like it is, we could do some one on one as time permits after we go over my configuration. I hope that will not take too long as I'll get the critical components documented in the PDF and distributed in advance. Since Mike is UK, I'm trying not to schedule something too late. Hopefully one of the candidate times will work. If not jointly, I can always to one on one to adapt to your schedule.
More to come,? Ron WB2WGH
On Thu, Feb 13, 2025 at 10:08?AM gibsonmb < mike@...> wrote: [Edited Message Follows]
Thank you, this is really kind of you. Let's see if we can schedule something gentlemen. Give ema few days to get myself back up to scratch with the basics mas I gave up a couple of years ago as none of the SteamDeck flows seemed to work with the latest version of Node Red (at that time).
?
regards
?
Mike
--
--
|
Re: Stream Deck to Node Red (Zoom meeting invite)
Just wanted to thank Ron, Allan, Dave and the rest of the group for a very informative workshop.? I am a long time NR user and I learned a lot.? Hope you guys do some more of these. K2KXK
|
Re: Stream Deck to Node Red
Thanks Alan - what would be the best way for that function to check the current state of toggle to make sure the button is updated if it is changed on the node red UI?
|
Re: Sending test QSOs to the Contest Dashboard...
Oh gee Kyle that would be great when you get a chance.?
--
73 es God Bless de KK1L
Ron <><
|
Re: Stream Deck to Node Red
Dave, N3KBV and others
?
Attached is a simple flow that will toggle between "0" and "1", each time the SD button is pushed. ?You can use the 0/1 toggle as boolean true /false to trigger other flows.
?
configure the stream deck button as, using your IP of the device running Node-Red:
?
?
You can customize the button images as you like, ?This version will toggle the display between WA9WUD and WO2X with each button push:
?
You can configure each button in these functions:
?
?
You can grab the 0/1 output from the toggle here, to drive what ever you want on our control flow: 
|
Re: Stream Deck to Node Red
Hi Dave (N3BKV)
If you like, we can do some one on one via Zoom and Microsoft Quick Assist. I can record it for a reference for others to watch.?
First is the status update of both the Node Red dashboard and Stream Deck button. If you look at my Power Genius XL amp flow in the files section !Flows by Type!/amplifiers It has a good example of the method I use to update a button based on input from the device. In this case standby, idle, or transmit A or B. It stores current status in either flow context or global context variable. Then when the button is pressed a function node uses an if/else statement to get current status and change to opposite by sending proper command to the amp.
I then have created two jpg images for operate with green background and standby with grey background and convert those to base64 using one of the free online converters. Sending the image to the button based on amp status is done in my StreamDeck WS flow which is in the miscellaneous section as a zip file (link was posted in chat on the Zoom call).?
Again, I can help you with the one button so you understand the concept.
I also have a method of changing a button status in Node Red where there is no feedback from equipment if anyone needs that.
I¡¯m available most days late mornings/afternoons Eastern U.S. time.
73 Dave wo2x
toggle quoted message
Show quoted text
On Feb 16, 2025, at 7:16?PM, Dave N3BKV via groups.io <dave99ca@...> wrote:
? Thank you Ron, Dave and Alan for putting together the Zoom session.?
?
I've figured out most of the basics that were covered but I am running into a lot of issues trying to get things customized as I'd like them to be:
?
- Status + On/Off on one button - I'd like to pool status from my controller (via Modbus) to determine if the radio or rotor is on and then show that on the button graphically (using custom base64 images) and then have the opposite state triggered when I press that button.? So far the status blinks off/on continually unless I use a trigger node and then I'm having issues setting the reverse state of the button.? I've built out a function node to store the current state and update it if I change the state on the node red UI so I can have the switch do the opposite function but I'm having a lot of issues with it working correctly. Dave can you share the part of your flow with the trigger/filter in parallel? Maybe that is the fix I need. I think I have too much traffic coming in via the websocket and that is what is causing these issues.
?
I'm also seeing other problems that might be traffic related but maybe something else is going on with these:
?
- Sometimes when I update the Streamdeck button configurations they do not work unless I quit the Streamdeck software and restart it.?
- I often find I build something out and it works fine to come back later and not have it work at all - like getting context errors on the stream out nodes when I have them set correctly on the streamdeck.
?
?
?
?
|
Re: Stream Deck to Node Red
Thank you Ron, Dave and Alan for putting together the Zoom session.?
?
I've figured out most of the basics that were covered but I am running into a lot of issues trying to get things customized as I'd like them to be:
?
- Status + On/Off on one button - I'd like to pool status from my controller (via Modbus) to determine if the radio or rotor is on and then show that on the button graphically (using custom base64 images) and then have the opposite state triggered when I press that button.? So far the status blinks off/on continually unless I use a trigger node and then I'm having issues setting the reverse state of the button.? I've built out a function node to store the current state and update it if I change the state on the node red UI so I can have the switch do the opposite function but I'm having a lot of issues with it working correctly. Dave can you share the part of your flow with the trigger/filter in parallel? Maybe that is the fix I need. I think I have too much traffic coming in via the websocket and that is what is causing these issues.
?
I'm also seeing other problems that might be traffic related but maybe something else is going on with these:
?
- Sometimes when I update the Streamdeck button configurations they do not work unless I quit the Streamdeck software and restart it.?
- I often find I build something out and it works fine to come back later and not have it work at all - like getting context errors on the stream out nodes when I have them set correctly on the streamdeck.
?
?
?
?
|
Re: Sending test QSOs to the Contest Dashboard...
Yes, I have a flow that simulates someone contesting and sends Q XML data in N1MM format.? I'd have to dig it out and it pulls Q's from a SQL database.? Would it be something your interested in??
|
Sending test QSOs to the Contest Dashboard...
Folks,
Do any you know an "easy" way to send simulated QSOs to the contest dashboard? I thought maybe "Rebroadcast al contest QSOs to other apps" in N1MM+ would work to send all the Q's from a log back over UDP, but that did nothing for me. Before I continue to bang my head against a wall or work on other ideas I figured I would ask the hive.
?
Thanks.
--
73 es God Bless de KK1L
Ron <><
|
Re: Stream Deck to Node Red
Ron, I¡¯ve been pulled away by family.?
please record! Sorry to be missing your effort.?
David N4SZ
|
Re: Stream Deck to Node Red
Justin, the Zoom link was sent out yesterday. Feel free to join in.
Ron WB2WGH?
I¡¯d like to be on the invite as well please. Thanks, Justin
I would definitely attend a Zoom on this... as I'm just starting a similar project.
|
gibsonmb
Kyle AA0Z
Randy Buxton, W4IFI
Ken Kayser
KK1L Ron
Dave wo2x
David Billstrom