Re: How to Create an Azimuth Map?
Steve, 2 maps attached. Enjoy, Ron WB2WGH
On Mon, Jan 20, 2025 at 8:31?PM Steve Friebele WS70 via <sfriebele= [email protected]> wrote: Thanks for the map, but it does not have the home location, the file name says DM 34, and it should be DM43CR.
73, Steve WS7O. | Scottsdale, AZ
On Mon, Jan 20, 2025 at 4:01?PM Ronald Panetta, WB2WGH via <ron= [email protected]> wrote: Looks like beat me too it. Thanks Davea
Ron WB2WGH? Here you go ? Dave wo2x ? ? ? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
Steve, I'll send it to you in a few minutes.?
Ron WB2WGH?
On Mon, Jan 20, 2025, 8:31 PM Steve Friebele WS70 via <sfriebele= [email protected]> wrote: Thanks for the map, but it does not have the home location, the file name says DM 34, and it should be DM43CR.
73, Steve WS7O. | Scottsdale, AZ
On Mon, Jan 20, 2025 at 4:01?PM Ronald Panetta, WB2WGH via <ron= [email protected]> wrote: Looks like beat me too it. Thanks Davea
Ron WB2WGH? Here you go ? Dave wo2x ? ? ? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
Dm43. Oh. Thought it was 34.?
Ron sent a map. Check if it is correct. Otherwise will generate a new one.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 20, 2025, at 8:31?PM, Steve Friebele WS70 via groups.io <sfriebele@...> wrote:
? Thanks for the map, but it does not have the home location, the file name says DM 34, and it should be DM43CR.
73, Steve WS7O. | Scottsdale, AZ On Mon, Jan 20, 2025 at 4:01?PM Ronald Panetta, WB2WGH via <ron= [email protected]> wrote: Looks like beat me too it. Thanks Davea
Ron WB2WGH? Here you go ? Dave wo2x ? ? ? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
Thanks for the map, but it does not have the home location, the file name says DM 34, and it should be DM43CR.
73, Steve WS7O. | Scottsdale, AZ
On Mon, Jan 20, 2025 at 4:01?PM Ronald Panetta, WB2WGH via <ron= [email protected]> wrote: Looks like beat me too it. Thanks Davea
Ron WB2WGH? Here you go ? Dave wo2x ? ? ? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
Looks like beat me too it. Thanks Davea
Ron WB2WGH?
Here you go ? Dave wo2x ? ? ? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Steve Friebele WS70 via groups.io
Sent: Monday, January 20, 2025 4:16 PM
To: [email protected]
Subject: Re: [nodered-hamradio] How to Create an Azimuth Map?? If you have time I could use a map for DM43CR. No hurry. ? Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: How to Create an Azimuth Map?
Hi Ron,?
If you have time I could use a map for DM43CR. No hurry.
73, Steve ?WS7O
Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ? ? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Sounds good.?
73, George / W7GES?
toggle quoted message
Show quoted text
On Jan 20, 2025, at 11:51?AM, Dave wo2x via groups.io <RocketNJ@...> wrote:
? Hi George
There are a couple of things you need to change in the TCP request node. One is to keep connection open. Second is the end of string terminator. I have to check my notes but I should be able to help Kyle.?
73 Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:48?PM, George / W7GES via groups.io <geo.skoubis@...> wrote:
? If you two have any difficulties at all send another message in a few hours.?
I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.?
I remember there was some small difference connecting via TCP but can¡¯t recall exactly.?
I¡¯m at work now and managed to crack my new laptop screen so I can¡¯t connect remotely. ?
73, George / W7GES? On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote:
? Hi Kyle
I was away yesterday. I will be home in about an hour. Give me a call then
Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote:
? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.??
?
I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.??
?
Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.??
?
Kyle
AA0Z
?
?
|
Re: How to Create an Azimuth Map?
Map sent. Had an emergency and was away Sat and yesterday. Home now if you need help with the flow. ? 73 Dave wo2x ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Kyle K via groups.io
Sent: Monday, January 20, 2025 9:34 AM
To: [email protected]
Subject: [nodered-hamradio] How to Create an Azimuth Map?? I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
|
Re: Allowing the rotor flow to work via bearing on QRZ?
Hi Justin
I have done exactly that with the rotor flow you have using N3FJP AC Log. When rotor flow is in tracking mode it can receive azimuth from AC Log. Also there is a callsign window in the rotor flow. Enter call and hit return. It sends call to AC Log which does call lookup. aC Log returns azimuth. Then when QSO is complete there is a log contact button in the flow. It logs the contact in AC Log.
This can be adapted to any logging program that has appropriate API interface.
73
Dave wo2x
Sent from my waxed string and tin cans.
toggle quoted message
Show quoted text
On Jan 20, 2025, at 1:55?PM, Justin Mann via groups.io <w9fyi@...> wrote:
?Folks,
I¡¯ve got the rotor flow designed by Dave wo2x, and it works well when I enter a degree heading, and turn the rotor to what is specified. However, I¡¯d like to find a way to implement something that would allow that rotor flow to go out to QRZ look up a callsign, and turn my beam based on the callsign¡¯s bearing from my 4th I¡¯m assuming that¡¯s possible?
Thanks.
|
Re: Having to redeploy nodes to get a button to work ?
Debug nodes on the output are your friend!? If you want to post a screen shot of your flow for the KAT, we should be able to give you a idea where you should start to debug.
?
73
Kyle
AA0Z
?
|
Allowing the rotor flow to work via bearing on QRZ?
Folks,
I¡¯ve got the rotor flow designed by Dave wo2x, and it works well when I enter a degree heading, and turn the rotor to what is specified. However, I¡¯d like to find a way to implement something that would allow that rotor flow to go out to QRZ look up a callsign, and turn my beam based on the callsign¡¯s bearing from my 4th I¡¯m assuming that¡¯s possible?
Thanks.
|
Hi George
There are a couple of things you need to change in the TCP request node. One is to keep connection open. Second is the end of string terminator. I have to check my notes but I should be able to help Kyle.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 20, 2025, at 1:48?PM, George / W7GES via groups.io <geo.skoubis@...> wrote:
? If you two have any difficulties at all send another message in a few hours.?
I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.?
I remember there was some small difference connecting via TCP but can¡¯t recall exactly.?
I¡¯m at work now and managed to crack my new laptop screen so I can¡¯t connect remotely. ?
73, George / W7GES? On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote:
? Hi Kyle
I was away yesterday. I will be home in about an hour. Give me a call then
Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote:
? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.??
?
I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.??
?
Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.??
?
Kyle
AA0Z
?
?
|
If you two have any difficulties at all send another message in a few hours.?
I have a RT-21 set up for Tornado Tuner control over TCP via Node-Red.?
I remember there was some small difference connecting via TCP but can¡¯t recall exactly.?
I¡¯m at work now and managed to crack my new laptop screen so I can¡¯t connect remotely. ?
73, George / W7GES?
toggle quoted message
Show quoted text
On Jan 20, 2025, at 11:34?AM, Dave wo2x via groups.io <RocketNJ@...> wrote:
? Hi Kyle
I was away yesterday. I will be home in about an hour. Give me a call then
Dave wo2x Sent from my waxed string and tin cans.? On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote:
? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.??
?
I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.??
?
Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.??
?
Kyle
AA0Z
?
?
|
Hi Kyle
I was away yesterday. I will be home in about an hour. Give me a call then
Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 20, 2025, at 1:29?PM, Kyle K via groups.io <kylekrieg@...> wrote:
? A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.??
?
I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.??
?
Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.??
?
Kyle
AA0Z
?
?
|
A friend of mine got an GH RT-21 rotor controller and got it talking on the network.? The internal web server is at :8080.??
?
I'm looking at the current RT-21 flow in the files section and looks like it was setup for serial communication.? We'd like to communicate to it directly without PST Rotator running on a PC.??
?
Has anybody been able to talk to the RT-21 over the network on port 8080?? I'm not sure what port the GH device is listening on to respond to console commands.? GH support has been unresponsive.??
?
Kyle
AA0Z
?
?
|
Re: How to Create an Azimuth Map?
Kyle, 2 style maps attached. 73, Ron WB2WGH
I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
?
?
Thanks
Kyle
AA0Z
?
|
Re: How to Create an Azimuth Map?
Kyle, send me the location info and I'll get it back to you ASAP.
Ron WB2WGH?
I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
?
?
Thanks
Kyle
AA0Z
?
|
How to Create an Azimuth Map?
I looked in the group and can't find specific instructions.? Anybody know where to make this type of azimuth map centered on a grid square? Can't get a hold of the person who usually helps with it and I need one made ASAP.??
?
?
Thanks
Kyle
AA0Z
?
|
Having to redeploy nodes to get a button to work ?
Good evening. I have noticed on my KAT flow that when i push the button to toggle my antenna it works for a little bit but then? when i press it later on or if i come back and press it, it does nothing.? to fix it i have to go to the flows and basically refresh/re-depoloy the nodes and it works again.? ?
?
Anything I am missing? I don't see any thing jumping out on the debug info.??
?
brad k9bdh?
|
Dave wo2x
Kyle AA0Z
