开云体育

You can have the Flex relay turn on first, then DC supply. The radio should boot normal. Personally I leave the DC supply and radio on all the time but have the option to turn them off. I do shut off

And, which DLI switch do you use for each? Alan

Dave. Are you using two switches from the DLI? One for power and one for Flex on/off. I will send you a solution tomorrow Alan

All: I am using WO2X flow for the DLI switch to control my power supplies and a Flex 6600 radio remotely.? The Flex requires that the power supply for the radio be turned on 2 to 3 minutes prior to

Hi Mike, It would be helpful if you could dig it up and share it here. Thanks! Gary K6HN

I have a KPA500 flow stored some place. If you need it, let me know. Mike va3mw wrote:

Hi Gary, I think the commands are similar to the KPA1500. If you need assistance let me know. Elecraft has the commands available on their site.

The KPA500 Commands are available through the amps serial interface. I just started working on getting node-red to talk to the KPA500 and will report back when/if I get things working. Gary K6HN

I have been using the remoterig smart switch’s (2) for years with multiple system with no issues at all. Extremely reliable product. You may as y need an external relay for your amp, I think there

The following files have been updated in the Files area of the [email protected] group. * /HF Auto.json ( /g/nodered-hamradio/files/HF Auto.json ) *By:* Alan Blind, WA9WUD

I believe Mike, VA3MW does. I have a flow for the KPA1500 but mine is through the TCP network. Dave wo2x

Anyone have experience setting up NodeRed to remotely control the KPA500 ON/OFF and STBY/OPER functions? Was thinking of getting a RemoteRig RC-1216H to perform these functions but they are hard to

Node-Red flow to provide three ranges, High, Medium, and Low, of TX Power Limit. Uses PG-XL amp mode status and Flex Server Frequency as inputs. [image: Power Limit Dashboard.png]

Alan Blind, WA9WUD added folder */Flex TX Power Limiter, By Band*

Do you have multiple sources of SWR and need to consolidate the SWR readings? This flow will read the SWR from each device, display the result on a tile and turn the tile background color to

Alan Blind, WA9WUD added folder */SWR Alarm Tiles, Including "Highest" SWR Presentation*

The following files have been uploaded to the Files area of the [email protected] group. * /Alpha SWR Meter.json ( /g/nodered-hamradio/files/Alpha SWR Meter.json ) *By:* Alan

I forgot to include a screenshot of the SWR Sweep Dashboard Alan [image: SWR Sweep Guide.png] [image: SWR Sweep Data File.png]

Alan, Do you sleep at all? :) Mike va3mw [email protected]> wrote:

Alan Blind, WA9WUD added folder */WA9WUD FRS Flows*