开云体育

I used your example to create the following flow.? ?My function node only has 3 bands defined.? You will need to add all the bands you need. Here is the output:

Contact me directly. I’m good on QRZ 73 Dave wo2x Sent from my waxed string and tin cans.

Thanks, Dave. I had seen most of this. The two function nodes you mention (far right) appear to be after the get function causing the error. I have no errors with these functions. Clicking the button

Alan, I was going through some old email and wondered if you finished the Auto AGC flow for SmartSDR? Also, I am interested in a flow to adjust RX Gain in SmartSDR to tune to a specific Gain setting

Also, for example, I am on 20 meters on Ant1. Looking at the global context variable data subport is an array of [5,0,1,0] which means band 5 (20 meters) and antenna 1 (my Yagi). On startup of the

I wrote most of the flow and up Dated it from the V3 firmware to V4. Look at the two function nodes to the right of the switch node all the way on right side of the AGv4 flow. There are subport A and

Hi All, Who can tell me where the? global var "subport" is defined? The function "Title - Band display" in the AG2x8v4 flow is returning the error - "TypeError: Cannot read properties of undefined

Another issues using RPI GPIO pins to operate relays, is the "reboot" stage give random relay positions. For a RPI 5 solution and solving the random relay during reboot issue, consider what I do. I

I have two different relay boards with ethernet ports. One I have working fine using the modbus-flex-getter and the modbus-flex-write. The manual is good enough that I even understand how it works.

Tnx Mick! Op ma 21 apr. 2025 13:48 schreef Mick , W8BE via groups.io <w8bea2b2c2= [email protected]>:

Good to know Bill. Post if anything changes. I use external (network) relays and switches for antennas, filters, AC and DC. 73 Dave wo2x Sent from my waxed string and tin cans.

Hi All, Interesting and good to know there are some benefits. I recently started my Pi journey with a Pi5. I have since learned that the GPIO functionality is not reliable under Node RED. I had to

transmit set vox_enable=1 transmit set vox_enable=0

Hi, Using the Flexradio-request node, I tried sending a payload with "transmit set vox=1", or vox=on, but nothing happens, also no error is returned in debug. Looking for the right direction....

If you want even more performance, get one of the cases that support an nVME in PCIe 3 mode. That is my production Pi. Development Pi is a Pi500. 73 Dave wo2x Sent from my waxed string and tin cans.

Thought I'd give some input on this. I just upgraded my Pi4 16GB to a Pi5 16GB. This is a dedicated Pi running only NR off of a 64GB card. I have 24 separate flows going on in my dashboard so I'd say

Hi Barry, I got also some emails. The JSON file you will find here: /g/nodered-hamradio/files/%211%21%20Flows%20by%20Type/ROTORS/4O3A_Azimuth_Magnetic_Sensor.json We use it for remote

Tom: I happen to have the 4O3A Azimuth Magnetic Sensor but have yet to set it up. It is currently mounted on my KT-36 Triband yagi but have yet to place it in service. Your posting has rekindled my

Hi everyone, I'm new here, and I'd like to share a project I've been working on over the last four weeks. For years, our club station has experienced issues with our Create rotors. To address this, we

Hello Fabian, is there any swagger? or another description? I need to know what is available. Regards, Ondra ?t 17. 4. 2025 v 8:38 odesílatel Fabian/EB1TR via groups.io <fabian@...>