¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nodered-Hamradio
  2. Messages
Single Messages Topics Expanded Polls

Re: Distributed Raspberry Pi running Node Red #basic-training-sessions

 

¿ªÔÆÌåÓý

Hi Tim,

Are the SteppIR, rotor controller, and antenna switch all located at the tower? Do you have anything else in the shack that needs to be connected to Node Red (not including network)?

If so, then you don¡¯t need a Pi in the shack, just access the dashboard over the network.?

If you need to plug in equipment into a Pi at each end then Node Red on both, send info to and from tower Pi to shack Pi via MQTT. Have shack Pi present dashboard via web access.

73
Dave wo2x


On Dec 18, 2022, at 3:41 PM, Tim Huffaker <thuffaker@...> wrote:

?I would like to have a distributed raspberry pi system with one runing the dashboard. For my station I woud have raspbery pi¡¯s talking to my Setppir, rotor, and antenna switch, then send that back to the raspberry pi in my station. ?Then I only need a network cable to the between the tower and station. ?

Now my question is do you need node red running on both Raspberry pi¡¯s. If so what do I run on the remote one. ?

Tim?
KM4ESU

Join [email protected] to automatically receive all group messages.