Re: FRStack Web APIs for RPi with FRStack Node Red Flows
|
I am running it on a Pi 4 with 4 GB ram Not sure how well it will run on a Pi 3 B or B+ ? 73 Dave wo2x ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Neal Pollack
Sent: Saturday, July 25, 2020 7:21 PM
To: [email protected]
Subject: Re: [nodered-hamradio] FRStack Web APIs for RPi with FRStack Node Red Flows ? Can this setup run ok on a pie? ? On Sat, Jul 25, 2020, 4:03 PM David De Coons wo2x <RocketNJ@...> wrote: OK, figuring out some things then going back to Alan¡¯s notes I installed .Net and FRStack on my Node Red Pi 4 with 4 GB ram. Initially it was sluggish but after about 30 seconds it is responsive. Nice work Mark! Very handy to access radio controls and info. ? Here¡¯s some pictures of the three screens comprising my dashboard. ? Dave wo2x ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Alan Blind
Sent: Saturday, July 25, 2020 1:43 PM
To: [email protected] Group Moderators <[email protected]>
Subject: Re: [nodered-hamradio] FRStack Web APIs for RPi with FRStack Node Red Flows ? Here is a link to my rev-0 disk image of Node-Red and RPI FRStack. Contact me with private message for login information. The image is set up for "Headless" VNC Viewer and SSH Terminal access.? You can also use a monitor and keyboard. Rev 1 is uploading (I have slowwwww ISP speed) ?and may be available?tomorrow.? Rev 1 will be in the same folder, so just check from time to time.? If you cannot wait to upgrade, see Mark's earlier instructions on how to update.
|
Dave wo2x