¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: rf-kit rf2k-s flows?


 

Hi Michael, I have RF-KIT too.. i will be happy if somebody will prepare some flow for tunnig process. Lot of times I forgot to switch?to standby mode before tune.
And definitely?should?be fine to have all in one window?with antenna and operate switches and temp indicators.
Also nice would be when more antennas can manage?memory banks by antenna switcher.
Moreover - somebody try to use RPi in an RF-KIT amp like the Node-red service server??

Tom
ok1dwq

p¨¢ 5. 3. 2021 v?22:02 odes¨ªlatel Michael Walker <va3mw@...> napsal:

I have an RF2K here.? I am not using it at the moment, but the only control is via CAT.

I've asked him for a TCP socket, but they haven't gotten there yet.? They have had an issue with their original programmer who passed away in the middle of the project.

Mike va3mw


On Fri, Mar 5, 2021 at 3:43 PM Dwight Bosselman <NS9I@...> wrote:

I like your idea - I ordered it with arrival on Sunday. ;-)

tnx Dave 73 Dwight NS9I

On 3/5/2021 12:59 PM, David De Coons wo2x wrote:

The advantage of the cable is to have the amp tune to the correct band and if you are using the antenna tuner in the amp it will preset to the correct tuning before transmitting. Otherwise when you first transmit you can be transmitting into a bad load (wrong band or mis-tuned antenna tuner). Personally I much prefer to have the amp and tuner on the right frequency before applying RF.

?

That is why I dislike the new PalStar solid state amp, no CAT input. I do not want to band change and have to send a couple of dits first.

?

I wonder if the new controller that replaced the Arduino is capable of a telnet connection for control and monitoring? That would be a question for Reinhardt. The KPA1500 and PG-XL are much better amps for remote operation.

?

Dave wo2x

?

?

?

From: [email protected] <[email protected]> On Behalf Of Dwight Bosselman
Sent: Friday, March 5, 2021 1:32 PM
To: [email protected]
Subject: Re: [nodered-hamradio] rf-kit rf2k-s flows?

?

Yes not much being heard from Reinhardt lately.

Same for Flex, lotsa hype about a new version of their firmware for the last month, turned out only to be for those that have their Amp.

So Dave , with what Andy has has said, is it really worth getting that cable?

Thanks to all!

73 Dwight NS9I

On 3/5/2021 11:17 AM, Andy (KU7T) wrote:

Hi,

?

I know that the RF-Kit amp does not allow for anything be controlled via CAT, except the frequency. Also, it does also support RF autosensing, so the CAT is not even needed.

?

What is the exact purpose of a flow for the RFKit?? Ideally, I would like to see the output power, SWR and stuff like that but none of these will be available on CAT.? I had hoped that RFKIT would support these things by now, but their development has pretty much been stalled for years.

?

73

Andy

KU7T

?

Sent from for Windows 10

?

From: Dwight Bosselman
Sent: Friday, March 5, 2021 9:06 AM
To: [email protected]
Subject: Re: [nodered-hamradio] rf-kit rf2k-s flows?

?

Hmm, I can't get that to come up Dave.

Amazon opens active on another one of my orders. Strange. Can you give me a model number or something?

?

On 3/5/2021 10:53 AM, David De Coons wo2x wrote:

This is the one I have tested and works. Must have FTDI chipset and not a bootleg

?

Dave

?

?

Sent from my waxed string and tin cans.?




On Mar 5, 2021, at 11:49 AM, Dwight Bosselman <NS9I@...> wrote:

?

Hi Dave

I don't have one of those cables. I see a variety on-line.

Would this fill the bill?

?

T U 73 Dwight NS9I

?

On 3/5/2021 9:47 AM, David De Coons wo2x wrote:

USB-A to USB-A crossover cable

?



--
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? VY 73!? Tom? OK1DWQ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?


Join [email protected] to automatically receive all group messages.