You can edit the appsettings.json file in the FRStack folder located in the /usr/local/frstack folder

?

The latest FRStack webapi install does not set the amp to 50 watts after tuning. (previous versions did)

?

There is a setting for maximum power when amp is in operate which? defaults to 50, so if your radio was at 100 watts on 10 meters for example and you QSY to 10 meters, power would be set to 50. If you had power for 10 meters set to 40 before QSYing, it would be 40. This is only to help protect the amp if you have the power too high and forget to adjust it lower to prevent overdriving the amp. You can disable it by changing to zero or set to whatever maximum power you want, but it is for all bands.

?

Here is the PG XL settings from the appsettings.json file

?

"PgxlTuneStandby": "true", // this will set AMP to STANDBY when TUNE is activated

??? "PgxlModeRestore": "true", // this will return AMP to OPERATE after TUNE complete

??? "PgxlRadioMaxPower": "50", // this is MAX radio power level when AMP is OPERATE

??? "PgxlRadioStandbyPower": "100", // this is MAX radio power level when AMP is STANDBY

??? "PGXLOnAntenna": "0", // 0 or 1 or 2; 0 for both, 1 for ANT1, 2 for ANT2

?

73

Dave wo2x

?

?